-
Active Member
Passenger handle
Has anyone modified the passenger handle? I would like to cut-away the handles that stick out from under the seat. An easy job, but I'm not sure if there is anything "important " embedded in the center of handle portion.
Thanks
-
Very Active Member
PASS. HANDLES
If they are heated there will be wires connected to the harness. If not just un-bolt them ........ Mike
-
Very Active Member
Depends....
Standard on the GS/RS/RSS and ST with no electrics involved (heated grips, radio controls etc) should be able to cut them off. Being a one piece unit you could remove it and add spacers where needed. Not sure why you would want to they are handy for many reasons besides the passenger holding on...unless you just want the passenger to hold on to you.....
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Active Member
Some day you're going to want to strap an extra bag behind you back there, and you're going to say, "GAAH!"
-
Very Active Member
-
Very Active Member
PASSENGER HANDLES
A thought, if you ever have to move the Spyder .....what is better than those handles ???, nothing else comes close to the strength of them ....... jmho, Mike
-
Active Member
Relax people, it's a look to use when I have the mono seat cowl on the bike. And, of course I'm not going to cut the stock handle, I'm buying a spare set of handles.
-
Very Active Member
You actually need them to haul a case of Labatt Blue bottles in a safe manner.
-
Active Member
Well, that's the best reason I've heard yet on why to keep them. But, the Spyder has so much storage that I'd rather keep the, in the frunk that I am converting into a giant cooler!
Originally Posted by kep-up
You actually need them to haul a case of Labatt Blue bottles in a safe manner.
-
Passenger Handles
I didn't see any handles on Lamont's site. Could some one post a link to them so I can check them out. My SO finds the stock ones too low to use safely. Thanks.
-
http://www.lamonstergarage.com/f3-grabrail/
He has them for the F-3, but I don't know if they'll adapt...
You probably should give him a call.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|