Search:

The long rear over hang of the MH pictured would never be able to handle the weight of a spyder on a lift. Without a tag axle, that would be a load for a diesel pusher.

Are you sure it is not the hard plastic/Nylon(?) piece that the sway bar is mounted onto the frame of the trike with?

I extend the charge cable and route it to the left side behind the wheel. When not in use I put the cap on it and tuck it into the grill. No need to open the frunk to connect it or disconnect it.

Well as long as this thread is again being posted to, what about the F3? I thought that it filled that gap as a lighter and lower machine! Put a HD anti sway bar and better tires on to increase...

Put a bright flashlight in at night and see if you see any light leaks around the lid/hood.

White RH Upper Lateral Panel
705006177
$329.99

My USCG (1965-1969 ET1 Vietnam Vet) vets hat goes in the top case of my 2018's along with tools and jacket liner and inter jacket when I think it is going to be cold. Lady friends that ride with me...

Buy it once and it will last decades. First one guy had one, then two, then three on and on. It became the de facto standard going way back.

So having had steering issues recently! Did you actually have the steering turned for a tighter turn then going off the highside of the corner, or did the steering lock and not want to turn more to...

I went ahead and replaced the other lower ball joint when it arrived. Second one went much faster than the first one. Have not had another case of steering issues.

Mine come off in a few seconds.

Dealers here are quoting around 600 dollars to do a brake flush.

Anyone in the area that has buds and wants to make a few bucks? TIA

Edit: Deleted contain. You can remove post!

Back in the early 70's I was a tech with National Cash Register. We would get a lot of calls to go out and plug a cash register back in when the power cord had got knocked out of the electrical...

To bad! So Sad! They are one of the best seat thingies! Sit on it and no one else can see it!

I bought an Ikea sheepskin, Cut it in two and sewed straps with plastic buckles on. Cool in warm weather and warm in cool weather.

Well "now" I know why I put both my phone holder and drink holder on the left side!!!

When stopping for lunch, the key goes in the little watch pocket of my riding pants. The rest of the time it is on the OEM key holder on my key ring.

There is someone from FB(East Valley Arizona Spyder Riders) coming to take them away. I will fix this posting when they are gone.

Well as part of getting the Champagne Spyder ready for the trip from AZ to WA I did some more servicing.

I found the short hose leaving the filter that connects to the plastic Y was starting to...

2024 solved this issue, as starter button is incorporated into the orange/red button. You push is down beyond run to activate the starter. My CFmoto CForce 600T quad was this way also.. Pretty cool...

OK, THANKS. The one that needs it done is in storage for the summer, I will follow up with the dealer in the fall.

Do both keys have the issue?

I like the color of my Asphalt Gray RTL (but it is the dark version) much better than the Champagne one. So I have slowly been converting it with chrome pieces.

Did you have a new rear tire installed recently? It is disconnected as part of doing a rear tire replacement.

Both of my 2018s are that way with a longer lead so the business end when not in use can be tucked back through another place in the grill.

Probably Highway 191

This is a very scenic twisty road. Alpine to Three Way!

That works OK for short people! For taller people, leaning in, down, and forward, plus looking to where you want to go, allows for fast cornering in the twisties.

No tire is under inflated until the PSI falls below the required amount for the weight it is carrying.

I was helping a friend yesterday who just bought a 2022 RTL with 2600 miles on it. One front tire had a strip of weights about 9" long and the other about 2". Enough said about the quality of Kenda...

I had them on my Champagne trike. You need a good spring compressor to install them. I turned them up 1.5 turns if I remember correctly.