You can try to get the update free, but 6 years have passed since the 20.8 update. It is worth paying the half hour it takes to update. Your music will work better along with your helmet headsets....
Type: Posts; User: JP58
You can try to get the update free, but 6 years have passed since the 20.8 update. It is worth paying the half hour it takes to update. Your music will work better along with your helmet headsets....
It doesn't matter. I've filled and top off clicked 5 times and even filled way up the spout and still reads the same. I used to stop on auto shut off and still had a full tank. There is an issue.
I do that to but my mileage on a tank of gas verys from 32-40 mpg. Depending on how aggressive I ride. So that could be 40-50 miles per tank difference. Kinda hard to gage that way.
My gas gage does not read full after filling some times. It will read 3/4 or a little above that. Had dealer check it out. Nothing was in the computer as no errors. He did some updates but don't...
No I dont. I own a 2018 F3L. Mine is bolted on. I would think if you can buy the whole mounting system it would work.
I have the trunk extender on my 18 F3L and my wife sits all the way back on the lip and the pad. You cannot even feel the lip it is so soft. She loves the extra room.
Thanks I will use Peak. Now on the F3L is the radiator hose the lowest hose to remove to drain. Can't see one on the engine. Anyone have a picture.
In Wisconsin coolant/Antifreeze is in the same bottle. It does both.
Has anyone used prestone or other color coolant other than the orange color. Other than the brp brand I could only find GM's dexcool that's orange.
Wife loves the extra room. Makes the ride for her much better. No cramped legs.
I have a 2018 F3 Limited with Spyderpops trunk extender. It makes the bike about 4 inches longer. I also have a F4 customs 25 inch windshield with wings. I was thinking the ultragard cover for the...
I have his brp design. With large roller. I changed out roller at 20k. Will just do the rollers till the spring wears out. The plastic brp arm is very strong. Just the brp single bearing roller...
I want to haul my F3 limited on a flat bed pickup and haul a camper behind the truck. Any ideas on how to get the spyder on the flatbed. Best ramps to use ect. Any pics or videos would be great.
Yes all model F3 seats are interchangeable and with all years.
Has anyone changed the pre-filter for the fuel evap canister, and where on the F3L is it located? Is it really necessary?
I haven't bought coolant yet. If I drain and refill with distilled water and drain again. I would think using a 50/50 mix would be to weak since you can't get all the water out of the engine block. I...
Question on the coolant drain. The brp brand comes premixed. System holds about 1 gallon. If I pull the lower radiator hoses. How much coolant comes out. How do you guys that have changed coolant get...
I've already done all brakes and brake fluid, air filter and Molly paste the front pully.
I'm getting parts for my 28k service on my 2018 F3L. So far I did the HCM filter with my end of season oil change. Got spark plugs coming from Bajaron. The last 3 items are coolant, fuel filter and...
I leave mine off. Relieves tension on cable and caliper so it won't stretch out. Block a wheel if need to.
Baker wings make lower wind rain deflectors for the F3 model's. They work good but would even be better if you have the ultimate floorboards also.
F3S is more stripped down. Sport ride. F3L has saddle bags, trunk, large dash we stereo, floor boards, heated grips, and more. Another words more luxury for touring.
My local dealer charges $1700.00 for 28k service. I will do myself in the spring since I'm at almost 28k . I did the HCM filter with my oil change already.
I had a 15 RTS and now and 18 F3L. I was never comfortable enough on the RTS. My legs and knees would ache. My legs were to wide spread and knees to low. Not a good combination. Love the cruiser...
I have to take mine off to loosen the axle nut. It's and aftermarket hitch. Showchrome.
Ok. I'm going to do my oil change and Trans filter this weekend. Do I need to remove the right driver floorboard to get the Trans filter off. My floorboards are in the position #3.
From the factory. It would be the single bearing. I would replace the roller with Lamonsters larger 2 bearing roller. It is around 50 bucks.
Yes I've had it less than 3 1/2 years. I ride between 8 and 9 k per season. I live in Wisconsin so it is put away for 4-5 months.
I guess I will order the filter and do it with the end of season...
On my 18 F3L. Do I need to drain the engine oil before changing it. Or is the oil level not that high. And if I do not need to change the oil, do you loose some oil when changing it.
To get passenger seat off insert key in ignition push key down and turn toward the wrench symbol. Seat will pop up. The other way is your frunk. Also there is no Schrader valve on the limited model....