Success at last. Removed the left side panel push pull pin and removed the panel. Used the dowel to release the latch as instructed. Now the fun begins making sure that the key and electric release...
Type: Posts; User: JayJay
Success at last. Removed the left side panel push pull pin and removed the panel. Used the dowel to release the latch as instructed. Now the fun begins making sure that the key and electric release...
Trikemutha thank you for the videos. They are a great help!
I am following the #2 procedure as you recommend. I managed to liberate the portion of the inner black panel on the left (port) side of...
Fortunately the Frunk is completely empty. My son and I also pushed down on the lid while trying to release it with the key and the solenoid switch. In addition we did the preceding with the ignition...
I own a 2013 RT limited. Up until recently I have had no problems with either the electric or key latch release options for opening the Frunk. Now simultaneously both options don't work. Long story...
Saw black or black currant RT on Lakeshore Road and 4th Line heading west at approximately 08:30 am on August 10th.
Much positive has been said about having the Spyder laser aligned. Are there any dealers in the Toronto area that supply this service?
Merry Christmas and a Happy New Year to one and all!
John & Anne Johansen + our dog Vixen, Oakville Ontario
Thanks everyone for the feedback. I elected to chock the tires and release the parking brake. During the winter months the Spyder shares garage space with my wife's car. Although every effort is made...
As per recommendations from this forum I have raised the pressure in the tires, added fuel stabilizer/topped up the tank/ and gave the engine a run. Moved the fuse from 6 to 7 and hooked up the...
As you can see from the picture on the left I love the bred. Great dogs!!
My dealer set front and back to Owner Manual specs (15/28). I find the spyder wallows in turns at these pressures. I have been told that this is normal handling characteristics for this vehicle. I...
I have a 2013 RT Ltd and I am gravitationally challenged fellow at 300lbs. For my situation forum recommendations appear to be tire pressures of 18psi in the front and 28psi in the rear. There was...
Scotty, thanks for the advice and I don't feel picked on. I will go through the manual and DVD as you suggest. I didn't hit the road completely unprepared as I just completed the Spyder Course...
You could very well be right. The thought has crossed my mind since I started this thread. To be honest I have little experience riding so everything was a bit of a blur. I just found a safe haven to...
Scotty, thanks for the info. Just curious, I have the SE5, when the spyder stalls does the transmission drop into neutral? When the spyder quit I was able to coast into a parking spot. I would have...
Having never experienced limp home mode before does it shut down the whole bike? In my case I coasted to the side of the road with no power. It only came back after I came to a complete stop and then...
Finally got to take out my 2013 RT for its inaugural spin. Went everywhere around Oakville; mostly 50km/hr ish ;). Elected to ride through downtown Oakville which because of the long weekend traffic...
I have the same Spyder as you. The whine is a normal part of the shutdown process and will continue for around 40 minutes and then stop. I can't give you the technical explanation for it but they do...
I just attended the Spyder course at Georgian College. For anyone interested in this course I would highly recommend it. Covered everything one needed to now to acquire an M2 with restriction. They...
Thanks everyone for your input. Buying an aftermarket seat to address a weight induced ergonomic issue seems to be a bit of a Cr*p shoot. Unfortunately it is an expensive gamble. I think I will give...
I just purchased a 2013 RT Ltd. Because I am heavy set (5'11"/300lbs) my seating position seems to be more forward than I like. It also creates an uncomfortable right foot position causing me to...
Thanks again for the info!! Yesterday I received an e-mail from Ron in answer to my inquiry about anti-sway bars for 2013 RTs. He said that he had just mounted his prototype bar on the 2013 the...
Old enough to know a good thing when you see it!! (:spyder2:) Young enough to enjoy every moment it has to offer :yes:!!
Thank you to Blue Knight, Scotty and JT for steering me straight!! Just to make sure I am heading down the right path, I am planning to purchase and have installed BajaRon's anti-sway bar and the...
I would like to purchase the relocators. Does Pitbull ship north of the border? I am also assuming that the relocators fit 2013 RT's?
Good Morning Ron,
I just bought a 2013 RT Limited and I am very interested in purchasing your anti-sway bar. What is the status of bar availability for 2013 spyder models? Also do you know the...
:congrats: on your new purchase!! Love the color. I just picked up a 2013 RT in black currant. Just beautiful when you get it out in the sunlight!! Ride safe.
:congrats: Welcome to the Spyder nation !! I to took delivery of my 2013 RT this past weekend but unfortunately no 200 miles for me :(. I am as enthusiastic as the next person but I refuse to have...
:congrats: and welcome to the Spyder nation. Ride safe!!
:congrats:. Welcome to the Spyder nation :chat:. Enjoy your RT. Most fun you can have that isn't illegal !! Ride safe.