Popping on decel is a lean condition.
Type: Posts; User: Deputy56
Popping on decel is a lean condition.
Do any pa spyder riders know of Megatech buds dealers. Just thought I would check before making calls. Thanks in advance
Roadster Renovations has a kit. check them out
http://www.spyderlovers.com/sponsors/rr.jpg
Thank You For your efforts. Some of us cannot afford dealer labor rates. The last time I was at a dealer, they wanted $100.00 authorization to diagnose clearly what was a warranty issue.
Go To http://www.whitehorsegear.com/silky-motorcycle-helmet-liner
Value Accessories a Forum vendor carries deflector for RT
:agree:
I used an automotive headlight spring removal tool to get third spring, it is thin enough to fit in.
Yes kit comes with actuator. I put one on my 2014
Road tested RT-S today. All vibration gone. Highly recommend road force balancing, not a cure all but just may smooth out your spyder.
I actually did my own work, the machine did both. Its is very tricky setting up machine due to spyder wheels. The machine checks roadforce first, then spins at higher speed for balance. The funny...
Road force balanced my 2014 RT-S front tires, got one side down to 1 lb. road force, and the other side to 8 lbs. Less than 20 lbs. is the goal. Its poring rain right now, will be interesting to see...
Yes my dealer has the rolo laser system. I have to fight the wheel to stay straight. When I start the vehicle the handle bars want to power to the right. My 2012 drove straight as an arrow.
I recently took delivery of a 2014 RT-S. While making the deal I added a laser alignment request. They indicated adjustment was made, however even at slow speed when you take pressure off handlebars...
All but bumpskid, Elkas. Got update kit today to use CB Radio. At my request the dealer laser aligned my unit during prep. The tech indicated he had to make a correction. Unit drives great. What can...
Its my second. Traded 2012 RT-S. 7 hours to defarkle other unit. Let the farkling begin on this unit.
Just got home with my new spyder.
2014 RT-S 86196
I am sure you already have done this, remember to thoroughly check bearings and seals in your wheel while it is apart.
Good Luck
Bob:D
The secret to never wet is to follow directions to the letter. Thin coats do not cause the milky white effect you got. I too learned the hard way.
Thank You for taking the time to do this
Just wanted to thank Ron for another GREAT product. Keep up the good work.
I know when I purchased my ultimate seat, he took time to explain to me to install rain cover he provides free with seat purchase. He told me extended exposure to water could damage inner seat. Just...
Use the map closest to your setup. as you drive it will reset tables based on your setup. Depending how much adjustment is necessary it may require a tweak by you on a computer. Call there tech...
Check Tire Pressure, Check any obvious front suspension issues, Check alignment at Dealer. That should get you started.
I believe you are suppose to tap into that wire not cut it. Recheck your directions.
Installed Ron Bar on my 2012 RT-S with Elkas. There was significant improvement.
I recently had my 2012 RT-S in for a belt adjustment and requested they check for a water pump leak. sure enough the pump was leaking. I also pointed out a bad multifunction switch and cluster(Turn...
Does anybody know the procedure to transfer mileage from old cluster to replacement cluster on 2012 RT-S. Thanks
Any further word on Lens front shock adaptors for RT.
Sent from my SCH-I605 using Tapatalk 2
Installing a chrome windshield support bracket on my 2012 RTS. What is the proper torque of new style pivot pins. I can not find it in service manual. Thanks