Search:

I
the clock only works when you turn the ignition on. I have a button lowerdown near the speaker that when pressed sets the time. I didn't want the clock to be permanently powered because a lot of...

Hi, yeah I got the clock from Ebay it wasn't expensive , just search eabay for a 52mm analogue clock and it should come up in your search box, :-)
I went with a replacement clock on my fuel gauge...

So I've now fitted both replacement gauges, wanted to keep it simple with no mess. Installation took about 1 hour. First pic is with the ignition key in the on position and the voltage showing is the...

Cool but just so I get this right, the cable with the female spade connector (I take it) is the + 12v switch that is connected to the relay that brings the lights on. The centre cable of the 3 is the...

Thanks Bob, I bought this this gauge as well, after seeing your clip. But I also bought an analogue one aswell just in case I didnt like it. I noticed that the instrument on the other side of your...

How are those connections working out for you? I didn't connect mine up like that. I used the centre cable out of the block of 3 but then I used the loose red cable to give me the 12 volts. You seem...

Well I'm waiting for this volt meter to turn up, but if it's like the clock it should be a piece of cake. they fit in quite easy no issues at all. ...

Yep, just fitted an analogue clock this weekend buy using the +/- to the light on the gauge. The clock came with a button so that you can quickly set the time once the power is switched back on. I...

I recently had this problem but it turned out to be a broken parking brake spring.:hun: anyway after buying a new spring I took the tensioner off the back (that's the half circle pulley) and fitted...

Boooooooom! thanks guys, thats great advise, found it straight away :yes::thumbup::clap:

Hi Guys, looks like my rear spring on my parking brake has broke on my 2010 RTs. I'm reading that this was a recall item , Is this true? if not can any one give me a parts number or a web site of a...

So now im just tapping the hole with an 8mm tap
http://i853.photobucket.com/albums/ab98/campbellcherrydale/Mobile%20Uploads/20150325_172712_zpscwexs92c.jpg

And now this bolt is tight. Job done....

Yeah rule of thumb is the thickness needs to be the diameter of the bolt when tapping into metal and at first glance this looks to be good to go. Can am have increased the thicknes of the frame at...

So I was driving along the other day and decided to pull in to a road side bikers cafe. Tried to start my RT up and no power. After tugging and pulling found the fault to be the ground post under...

This might not be what your looking for but this weekend I had the same issue. Battery dead after driving it 20 miles. Well thats what I thought it was, it now turns out to be the terminal post under...

Hi Bob, yes it is, I did a thread on it on this forum from start to finish. It's really easy to do and once you've done it you will do on everything. :thumbup:
I also did the frunk in Plasti dip,...

It's now on the road and tested out fine. Needed to trim the guard but that was always going to happen,


http://i853.photobucket.com/albums/ab98/campbellcherrydale/20150310_172012_zpscx9mcn4s.jpg...

Hey a big thanks Bob, I think your right, well I hope so. I've never looked at the belt in reverse. I feel a lot better now, time to hit the road,:thumbup:

I've just built my own tensioner, and I've had it built much the same as the clamp on method. But the tension wheel has no guides on the edge so precision has got to be very accurate. I've noticed...

I contacted the artist in NY by email and he said that he was not the artist, so it looks like back to square one.

http://i853.photobucket.com/albums/ab98/campbellcherrydale/20150208_145804_zps259d02dd.jpg

http://i853.photobucket.com/albums/ab98/campbellcherrydale/20150208_152337_zps8736c729.jpg

This building is hundreds of years old, so mixing the old with the new seems to work well,



http://i853.photobucket.com/albums/ab98/campbellcherrydale/20150208_152337_zps8736c729.jpg

I thought I'd try a different slant on taking pictures of the RT, so I went to an Haunted house near by and shot some pics, NO PHOTO SHOP WAS USED, that really is mist creaping over the fields.

...

Hope you all like a slightly different approach, with my new airbrush painting I thought of sending the RT into the dark side. Pictured in North Wales (United Kingdom) at a famous haunted house!!
...

Good thinking, here in Wales we have quite a few castles and old buildings, I'll start planning, ;)

Found a small signature at the bottom right of the lower snake, it looks like JAMZ, so I looked up airbrush artist from the USA and low and behold his name came up,,,,, James Kunzinger ...

Ok so now the frunk has arrived and looks even better than expected.

http://i853.photobucket.com/albums/ab98/campbellcherrydale/20150206_143321_zpslq4c8bif.jpg

...

Hi Guys, I've just made a purchase of this trunk from the States and I'm just asking if you know of the artist or the reason or maybe who had it before, thanks:helpsmilie:
...

So during the last battle between Luke Skywalker and Darth vader a conversation took place, it was an epic battle,
Darth Vader; Luke I know what your getting for Christmas.
Luke Skywalker; No you...