I feel the same about all Spyders, the nose needs to be refined. The Ryker has been the model I like best simplicity wise, but I don't like cruiser seating. The GS/RS/RSS is my prefered model for...
Type: Posts; User: AMTJIM
I feel the same about all Spyders, the nose needs to be refined. The Ryker has been the model I like best simplicity wise, but I don't like cruiser seating. The GS/RS/RSS is my prefered model for...
The original GS exhaust that met federal standards would have burns and holes form, there was a Hindle exhaust for the GS that was offered supposedly for off road use and it had problems. Slip joint...
The aftermarket filter and exhaust did a lot for these, many of the original stock exhausts and the Hindles had a short life(burn thru and popped rivets). I think it was 09 when they lowered the...
I saw one at the Border Patrol check point near Sonoita, that's the only one I have seen so far.
https://youtu.be/otv24repfW8
This is recent activity, may still be available...the twin can is the one you want, it usually holds up better.
https://m.facebook.com/groups/31362956903?view=permalink&id=10156678484796904
This is what it's like when the racing drones are there.
https://youtu.be/1ZU3BL1R1Bo
A video drone happened to be there that day, the local drone racing team has been chasing events there recently.
https://www.youtube.com/watch?v=ZE5pWtkrXXo&feature=youtu.be
Yes, it was new-old stock '09, bought it in 2010. It's been a great machine, spent some time on the track here, I haven't done that with it for 3 years now. We just go scrambling around on it, we...
I just went with the stock bearing and soft parts from Cheap Cycle parts IPC. They have all been delivered and getting changed Tuesday. I have a few other bikes to ride, not as busy on the Spyder in...
Had a rear tire change today and a bearing is starting to fail, which means it's time to change regardless. None in stock in the area and several options online.
Any brand prefered choices?
Thanx
Sensor rigging most likely or they possibly got them deactivated via BUDDS (which I don't think is allowed by Can Am dealers) like in the original videos to show what the spyder benefit of the...
If it won't tap, try a heli-coil...or maybe try that first. It's for a situation like this if you are not familiar with them.
There are 90' mandrel bend elbows available, some vendors on here sold them and ebay. I think they were all 2 inch dia. Check RLS Exhaust for a quick cheap short exhaust as an option otherwise, I...
How did you wire the speaker system for power and ground? The relays that power the bike may not have great contact and could be why your fuel pump was chattering and lights came on. Mine needed...
Does Sierra carry Kumho or anything else besides Kendra? I still have a some tread on the rear, but the tire has seen a lot and getting old.
I have heard Dragon Tail is better maintained, but that's it. The New Mexico parallel side of this is highly patrolled, AZ side seems more loose and lets you enjoy vehicle handling. Fresh tar snakes...
It's for killing metric zombies
Did the new battery get propper charge time, the type battery they use in Spyders are a little touchy, semi wet glass matt/ gell cell. Does the electric steering assist feel like its working? Should...
That ground under the seat is a little tricky to clean and tighten, the instrument screen going blank and reseting kinda points at a bad ground, the relay is willing but the connection is to weak to...
Looks like the ground that is visible when you lift the seat may be loose or croroded...fairly common problem but much earlier on. The relays for the trike are under that painted beauty cover just...
https://www.facebook.com/events/241321472911985/
I wouldn't recommend taking a Spyder to a outside source since they don't have any access to Can Am intranet/manuals or BUDDS link. The only non-spyder service I would consider is an Aprilia...
There was some effort back when these were first released for sprocket pulley and gearbox changes to lower rpms. One of the combo theories included a larger diameter rear tire, there is a slightly...
Yes, and had that paper towel thing myself on the '08 I had until this was brought up on here. I think you can rotate the v closer to the top bubble, too if not already there. When I picked up a 2012...
If its still displayed, try flipping the key on/off 5 times in rapid succession, it may still be stored but usually disappears if the problem it senses is corrected.
Most rubber stripping and seals is out sourced, it's probably available by the foot, even on ebay.
In regards to the caps, the recall was that they just made a little slit or v shaped cut on in rubber underside. The cut needs to be clocked near the bubble thats on top of the cap. When you install...
It's fun to scramble on, it got quite a bit of attention at the car track we did the 3 lap parade on and other rides especially when parked. Many repeat the same thing, this version is actually...
https://youtu.be/ZE5pWtkrXXo
https://youtu.be/bz2QclCtE0o
I'm in a few of the drone scenes in the Musselman track video and you can hear my Spyder behind the camera guy while waiting to enter the...