Search:

Yes bigger brake discs and stickier pads will help but keep in mind that new brakes need to be “bedded in” for maximum braking ability. I won’t go into details here, too long, but just Google...

In my experience with Corbin you can have them adjust the seat padding to suit your body as needed. Just call them and talk to them about your needs. They can probably make it happen.

They used to...

You will not gain any significant HP from an aftermarket exhaust. Keep the factory exhaust and enjoy the bike for what it is!

Mounted mine on the A-arms. The tube clamps centered themselves on the oval tube and basically ensured they were level, then I adjusted them for lateral direction and tightened the bolts using a bit...

Agree. Opening up the air box won’t help with air induction due to the fact that the filter is the most restrictive part of the air intake system. The mod doesn’t overcome that. He may gain a hp or...

Maybe, but I’m not the one who swapped factory wire connections! My reply was just a suggestion.

Assembly plant for ATVs and UTVs. Doubt Ryker supply will suffer. Glad to know everyone got out though.

Nice, but a bit over the top lol.

Nope, going for stealthy and subtle.

When I got my Ryker my freind said it looked like the Bat cycle, so I put a small Batman logo on the rear fender, then had a custom designed front grill made by NC Kustoms. Cut from steel and powder...

Seems to me that the high beam icon should be lit when the low beams are on so you can see the high beam icon in the dark making it easier to identify to turn them on, then reverses to allow the same...

Would like to see pics of your windshield!

Very clean install, looks factory. Personally I would have just wired it into the headlight circuit so it would come on with the ignition on, thereby eliminating the switch and having them operate...

Never had a stability problem. I had a death grip problem which exacerbated the twitchiness at speed. Once I eased up on my grip on the bars she smoothed out. Many members have experienced the same. ...

Answered in other thread. Ease up on those grips!

My 900 is rock solid at 105 mph, let alone at 50. Sway bar end links have nothing to do with straight line stability, they and the sway bar are there to control body roll in corners, keeping the body...

eBay, comes in different widths and colors. I spilt the side stripes in half.

Added some stripes and decals from a certain Italian thoroughbred. The badges are kind of a joke but on the other hand the Ryker can probably take most Ferraris off the line and stay ahead of them...

I have that backrest and since I never use it, I got it for the wife who is somewhat large around the middle and she found it to be too curved and the ends poke into her sides a bit.

It is, by the...

Update on this project. I wired everything as I saw fit and when I turned the engine on to have power to the headlights, my little voltage regulator began to smoke and I shut it down. I didn't even...

This! And common and modern manufacturing includes robust cleaning steps that practically eliminate FOD (Foreign Object Debris) such as chips and oils. The microscopic dust and larger particles...

See PM.

No help with the downshifting issue but the normal engagement clunk I have learned to handle by anticipating when I'm going to get rolling again and with my foot still on the brake, I increase the...

After some research I have a plan. Going to feed off the low beam circuit through an adjustable DC voltage reducer set at the minimum voltage that the LEDs need (7V) to the lights and then straight...

No these are a set of LEDs I got from Ali Express. They just have 2 wires. I'm assuming that the Ryker headlights have 2 elements, high and low, and each operate independantly, so I'm going to try to...

Thanks for that, but how do I reduce the voltage to the lights when operating as DRLs connected to the low beam circuit?

Hello all, new member here with a question. I am going to install LED aux lights on my 900. Before the Ryker I had a BMW R1200RT which had a CANBUS system. I installed a module into that system that...