Search:

Type: Posts; User: Jsmith8695

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    8
    Views
    272

    My class was all day Thursday and Friday. If...

    My class was all day Thursday and Friday. If this is a MSF class, they require 16 hours. We spent 3 hours in class each morning and 5 hours on the range each afternoon.
    It was time well spent and...
  2. Replies
    23
    Views
    625

    Can you provide some information on the size or...

    Can you provide some information on the size or ordering information? Obviously CAN-AM is not listed in the dropdowns.
    Thanks
  3. My concern was not the speed and control, but the...

    My concern was not the speed and control, but the reserve available to the rider in case more speed was needed.
  4. For WallyM. Don't forget, top speed is about 102...

    For WallyM. Don't forget, top speed is about 102 mph with one rider.
  5. Manuel states the RYKER should be transported...

    Manuel states the RYKER should be transported with the front facing forward.
  6. Thread: Hot ankles

    by Jsmith8695
    Replies
    14
    Views
    749

    I have noticed some hotter air at the ankles. It...

    I have noticed some hotter air at the ankles. It was nice in February, but not a real problem in the summer. The over the ankle leather boots are insulating to some extent and I just move my feet...
  7. Replies
    19
    Views
    630

    No issues yet with my rally.

    No issues yet with my rally.
  8. Replies
    5
    Views
    488

    Glove box lock for the RYKER

    The vendor whose name can not be displayed in this forum has just released a lock for the glove box on the RYKER. SEEMS A little pricey
  9. Replies
    8
    Views
    448

    There are installation videos on you tube and the...

    There are installation videos on you tube and the Lamonster web site
  10. Replies
    32
    Views
    1,557

    I ordered mine this morning. Any suggestions on...

    I ordered mine this morning. Any suggestions on a torque wrench?
  11. Thread: Gear lever

    by Jsmith8695
    Replies
    14
    Views
    718

    I have difficulty placing in reverse using the...

    I have difficulty placing in reverse using the toe area of my boot (short legs I guess) however no problems when I use the heel of my boot. Keeps my hand cleaner.
  12. Replies
    10
    Views
    449

    ....attached link to instructions- ...

    ....attached link to instructions- ...
  13. Replies
    28
    Views
    1,137

    All white scorpion EXO R420

    All white scorpion EXO R420
  14. Replies
    32
    Views
    2,904

    I remember looking at the BRP instructions on...

    I remember looking at the BRP instructions on line. They used 'BINDER Clips to squeeze the tabs on the bottom. The clips need to be small enough to fit through the holes in the seat pan. Just...
  15. Replies
    9
    Views
    711

    Poll: Bars all the way back and pegs forward (position...

    Bars all the way back and pegs forward (position 2 I think)
  16. Replies
    9
    Views
    553

    That wire should be there. It is the location...

    That wire should be there. It is the location that the BRP auxiliary LED lights connect into (I have the lights) See the installation instructions for the lights for its location as I believe it...
  17. You might want to try box tubing. Might be able...

    You might want to try box tubing. Might be able to go with a smaller diameter
  18. Replies
    9
    Views
    553

    I remember someone indicating you can pull 12...

    I remember someone indicating you can pull 12 volt power from the where the two USB connections come from in the glove box. You have to pull the glove box out to access this location. There is also...
  19. I tried riding without the key. Got a message to...

    I tried riding without the key. Got a message to check key in the bottom display which replaced the tachometer reading. It would also replace the miles to empty reading or anything else set to...
  20. Replies
    13
    Views
    859

    I also received a call last week and couldn't...

    I also received a call last week and couldn't talk then. Received a call this afternoon. As CTAC reported it was a post purchase follow up call to elicit positive comments and concerns.
  21. Replies
    100
    Views
    5,883

    Wheel problem with RYKERS

    There appears to be a potential issues with the wheels on the Rykers. For those on youtube look up videos by T47 Productions. There are 3 videos by this person who had one front wheel fall off and...
  22. Replies
    33
    Views
    1,354

    There are many of us here that would fit the...

    There are many of us here that would fit the "grandpa mode" definition. I took no offense -- I am as old as I am. Just glad I made it this far.
  23. Replies
    8
    Views
    507

    There is a wiring diagram in the electronic shop...

    There is a wiring diagram in the electronic shop manual that is for sale on ebay (i believe) cost was about $25. I think the company was Green Manuals
  24. Replies
    8
    Views
    507

    There are many external fuse blocks that are...

    There are many external fuse blocks that are available. They draw their power from the battery. Some have "keyed" connections that are triggered when the bike is turned on. For lighting and a few...
  25. Replies
    15
    Views
    1,114

    Try the accessory port on the left side under the...

    Try the accessory port on the left side under the colored panel.
  26. Replies
    8
    Views
    509

    It is a gas spill off. It is in the manual...

    It is a gas spill off. It is in the manual someplace as I remember reading about only clicking the nozzle once when it stops or fuel will spill from the overflow tube.
    -- jim
  27. Replies
    2
    Views
    263

    Ryker and electrical add-ons

    I have a Ryker Rally and would like to add additional rear lighting (running/brake light) and turn signals.
    Has anyone used the showchrome auxiliary fuse box to add additional lighting and other...
  28. Replies
    31
    Views
    1,809

    The passenger seat and the rear case are designed...

    The passenger seat and the rear case are designed to be removed and interchanged with each other. Unfortunately they cannot be used at the same time without deploying the aftermarket customization...
  29. Replies
    12
    Views
    1,205

    I believe the lock is 707000666. Do not know...

    I believe the lock is 707000666. Do not know about the bolts as I bought this.
    www.*********.com/canam-ryker-keyed-parking-brake-lock?vehicle=4
    It comes with the bolts and a few are currently in...
  30. I prefer the tips on the Kaos model but again is...

    I prefer the tips on the Kaos model but again is too loud.
Results 1 to 30 of 53
Page 1 of 2 1 2