If you have a Kenda rear tire, expect that. My 3 Kenda tyres all had flat spots and were causing bike to shake.
I replaced the tires with car tyres, run a lower pressure on the rear (22psi) and no...
Type: Posts; User: JackSA
If you have a Kenda rear tire, expect that. My 3 Kenda tyres all had flat spots and were causing bike to shake.
I replaced the tires with car tyres, run a lower pressure on the rear (22psi) and no...
I put Nankeng Eco 2 165 x 60 x15 on my F3L front. Very good in handling and well balanced. The vibration is no longer felt.
For the rear I put a Falken ZE 912; 225 x50 x15
I am very happy...
Just a simple question: Why on earth would you want to do that?
Your problem with acceleration when turning is that your bars are too far from the body. I corrected that by installing Rox Risers. You will experience the difference. You reach can be adjusted, and...
Thanks saw that. Does the $ amount include 1 set plus freight. I don't have a any one here that I know who may be interested.
Cheers
Jacob
Hi Joe, can you please quote for postage to PO Box 298 Woodside 5244 South Australia, Australia
Thanks
Jacob
I had the same problem. A backrest did the job, WITH Rox Risers. The rox risers are cheap and easy to install. Big difference nin comfort. I now do 600 kms a day and feel fresh.
All the best.
Why would you want to replace it yourself. We have different trades and professions. I am an accountant and will not allow a carpenter to do my tax returns. Leave the technical stuff to the technical...
I first had a cat delete pipe, then removed it after about two months. Only more noise.
I then had the ECU flashed to stage 2. It is a new bike!!! I now feel like I do not need anymore power. This...
Mine was done in early November 2018. Stage 2, and I am so satisfied with the vehicle now. Performance better, higher torque, no negatives. Fuel consumption the same, slightly better if you ride at...
I had a similar problem with my F3LTD. I then found that my front tyres each had a "flat spot" of up to 3mm, which made the not evenly "round". I replaced the Kendas with car tyres, and problem...
I bought the Bakerwings rack for F3 Ltd (2016). Super product. I then bought the Givi box of the size I wanted, and perfecto. I shortened the aerial to not be bent against the Top box when top box is...
Rick,
Fit adjustable Madstad screen. Rox risers for bars. Backrest for rider. Belt tensioner.
The above make it more comfortable all round.
I like the Madstad, adjustable therefore works best.
I cut two "shims" from a pepsi cola can, and inserted that. Fixed the slipping of the Rox risers!
Gents, I have 8500kms on my F3L.
I inspected my pulley, and see no red dust, however I have a lot of grey dust. Can that be from road dirt? Or is it grey metal??
Questio asked already, but I am also keen to know availability and price. Mine is for the F3Ltd.
Bugger, I could have had them cheap or free!!!@@@@:yikes:
I installed my Rox 2" yesterday. I like them. Pete you can adjust the Rox up and down quite a lot. Simply roll them. The biggest problem I had, was that the Rox bottom bars are too smooth, and I...
Hi Pete do you stream your radio to the helmet? If so, you need a Bluetooth device for the radio. I just stream music from my mobile phone to the helmet.