Search:

Thanks for all your help all brakes have been flushed, still have brake failure. When I run codes is still shows C1282, low pressure. However, when I push down on the pedal, I hear one click and not...

Yes, i did confirm this one is pushed in, the Emergency brake cable is not attached, and js the still cannot compress the piston, I bought a brake tool, but the issue is the piston is out fo far and...

Can someone please help. I went to change pads on my 2012 Can-Am Spyder RT and I could not compress the piston. I tried using a C-clamp, when that did not work, I used a rag and vice grips and turned...

Bruce, please PM me for my phone number if you have the pins, the clip is no problem I can find one of those at ACE hardware. Thank you

I made a mistake guess I forgot to put the clip on one of my rear caliper pins, anyway, it fell out while riding yesterday, lucky I was 2 miles from home, and I was able to nurse bike back home. Now...

What is the average cost my dealer quoted me $650.00 and stated it 4 hours of labor, to me that's a lot of cash for a brake flush. My 2012 can am RT has a brake failure for low pressure and was...

Do you know the part no. on EBC pads for 2012 Can am spyder RT? Will the ones below work

EBC Brakes FA630HH Double-H Series Sintered Disc Brake Pad, Black, 1x1x

Thanks for the info, I did flush out the front brakes, but I am having an issue with the rear, it's difficult to get a wrench on the bleed port, but now I think take it to the shop and see if they...

Can someone please assist, on my 2012 Can-Am Spyder RT we had a brake failure warning, and the code displayed is C1282 Low pressure. I was able to reset the code, but a few miles later the warning...

I had the same issue on 2009 spyder. when the oil light came on although the bike did not run erratic, I did end up replacing the sensor and it fixed the problem. If you take it to a dealer have a...

No it's not a challenge to remove the front wheels or the brakes, I have done brakes on all my vehicles for the past 40 years, to include motorcycles. Just really want to get a general ideal on when...

Hello Spyder lovers

I recently replaced my rear brakes on 2012 CAM Spyder RT with 17000 miles, I am wondering about the front, I tried to inspect them, but its hard to see the amount of pad left...

Update Installed new solenoid spyder ready to roll, thanks for the help, by the way I found the solenoid on eBay for $20.00 beats $55.00 that the dealer wanted, hopefully it will last for awhile. I...

Hello

Happy Easter new solenoid installed and it works, all is good, but I do have one question I was trying to remove the trail module control for the lights, I disconnected the control and...

Open on the solenoid on order. , and I will let you know the outcome, I did find a solenoid for $20 new on Ebay. Have a great day, Once again thanks.

When looking for a new solenoid Amazon sells them for 2012 Spyder RT roadster for $7.99, do you know if it will work. Instead of paying $55 at the dealer. Although 7.99 seems to cheap to me. The one...

Hello again, I read up on the testing the relay and the solenoid, the issue is it requires power to do the testing and if I connect the cables correctly the bike will continue to turn over and not...

First thanks again for all the help the small wire on top of the solenoid is for the battery tender, I did remove one small wire from the solenoid terminal and it still turned over, there are just...

Thanks will check out the relay and the manual tonight, do you where the best place is to buy parts. I called my local dealer they want $54.00 for solenoid.

Thanks and greatly appreicated, I connected just like you said and the solenoid engages as soon as I touch the postive cable to the battery, with key off, I never touched any of the other cables on...

Making some progress new issue you said the two cables that are tied together one goes to the terminal on the solenoid and the other goes on terminal by a fuse box. I do not see a fuse box. The only...

Thanks, I take closer look at it tonight, here is what I have on the positive terminal of the battery, I have two wires that are tied together on one terminal, two other red wires, one with nothing...

Hi Spyder owners.

Where is the best place to go for on line maintenance manual for 2012 Can AM RT Audio and Convenience model, I seen several sites selling them not sure which one has the best...

180019

As you will see in the photo there is positive battery cable then ignition wire going on one terminal. The original way is was set up was positive cable was on the bottom setting on top of...

Thanks but not even close to the same, I just have two wires the positive battery cable and the ignition wire, I put both on together and the starter engaged, the problem was bike was not on and it...

Hi Spyder lovers

I went to replace the battery on 2012 Can AM spyder RT, and I accidentally disconnected the wires on the starter solenoid. If any of you connected the starter solenoid on a...

Hi Spyder lovers, getting ready to change oil for the first time in the 2012 Can Am Spyder that I just purchase. I was told in 2012 that can am made a change to the panels when changing oil and that...

Hello Spyder riders

Does anyone have a suggestion for a drink cup holder for the driver on 2012 can am spyder Rt. I have been looking, but I am new to spyder world not sure what to buy.

Special thanks to Joe at Squared Away in Las Vegas, who specialize in laser alignments for spyders and other maintenance issue. He has outstanding knowledge on Can Am Spyders and was a huge help in...

How do you squeeze in the rear cylinder on the rear brake caliper on 2012 RT spyder? There is black gizmo circle item on the caliber, do you use a c clamp and put on end on the nut of black gizmo,...