I have a 225/50/15 . Kuhmo on my 2014 RT . with just over 20K on this tire it just slipped this AM . going slowly up a slick ramp, notice . the wear bars are showing will replace soon. Two up 98%...
Type: Posts; User: manxman
I have a 225/50/15 . Kuhmo on my 2014 RT . with just over 20K on this tire it just slipped this AM . going slowly up a slick ramp, notice . the wear bars are showing will replace soon. Two up 98%...
2014 RT. took the caliper off to clean the rotor as it was acting like it was warped. I decided to change the pads, I screw the piston in , I thought however I went the wrong way, counter...
To eliminate the air bag on an RT, how would one figure the proper spring rate to just utilize a shock only, probably an Elka. I am sure you would deduct the wheel and swingarm assb. weight since...
I made my mud flap out of a five gallon black utility bucket. Thick, right curve and you can make it any size you want. I used tin snips to cut, materiel is about 1/8" . thick............
It is not a difficult service. Take panels off and there it is, remove bolts and replace filter. Put pan uinder it to catch oil.......
I have thought of a single spring eliminating the airbag but wonder how a 700# spring would act with a solo rider. The combined wt. on my machine . 2014 RT . is 300# . I have no compressor. So I...
order the tire online (discount tire) about $82 , take the wheel to any tire shop and they will charge maybe $15 to change it. If you buy the tire from discount (if you have one available locally)...
Wanted rear rotor for 2014 up RT. Used but good.
Covers 2013 RT and many others .
Factory shop manual for 2013 Roadster Spyder series. Over 800 pages plus electrical schematics. As new. $60
plus shipping.
Can anyone tell me if front brake rotors off a 2012 RT . will fit on a 2014 RT . ? thanks.......
I find the info helpful and I trust his experience. It works for me. If you think it's too low go for a ride and feel the tire, if just warm to the touch it is right, if hot it is too low.....
.....SOLD...........
Yes they are adjustable. I just could not adapt to firmer ride at the lowest setting......
for sale, 1 pair. Fox shocks off my 2014. RT. Too firm for me , I do not ride aggressive prefer soft ride. $350 including frt. lower 48........
on 2014 RT. where are the evaporation canisters located ?
Elka is doing what it takes and are very good about it. I am sending back the heavy spring and they are taking care of all. Very good service they have given me.....
The spring that came with the shock was #200-225. I received a #500 per in. and that its too hard. I have an option of getting a # 3.50 hundred pounds per inch or a #3.75 hundred per inch. ..
The spring was too soft on the replacement shock. Bottom out. I do not have a compressor on board, have to increase settings manually. I run between 50-60 psi as I ride two up all the time. So I am...
Combined wt. #300 plus a few oddments. I have an Elka. rear shock which was sent with a weak spring. They sent me another spring which is #500 per in. This is too much, I am in the process of...
No, just the spring rate for the shock, the air bag I assume takes care of the machines wt.
I have both Fox and Elka on my RT. I will say that the service provided by Elka is superb. They will bend over backward to satisfy the customer. No experience with Fox service as I found them hard...
I have a 2014 RT. and trying to determine the spring rate per pound on the rear replacement shock. The spring that came with the shock is too soft and I have a replacement spring which is too harsh,...
Can one use an onboard diagnostic scanner on 2014 RT, and where is the OBD port on the Spyder........
I agree, it might take me 45-50 minuets for oil and filter. I drain the oil first and while it is draining I take off the panels by that time oil is drained. Install the filter, add the oil and...
I have a 2014 RT and have consistently got 40MPG. I do not ride aggressive and stay the speed limits. I generally get 215 before I stop still not seeing the fuel warning......
I have Phonak bluetooth and they are great. The helmet fit, I dug some of the styrofoam out of the ear area and that works well enough to wear them in my helmet.I cannot hear much of anything...
Lifting jack like Harbor frt. used to sell or similar......
I will take mine apart and report back of any findings. In fact I must order one from you....
I intend to change it, just curious if anyone found metal in the filter. Always took filter part on aircraft engines to check for foreign matter........