I do a basic alignment and then do one side at a time. Works well for me,
Be safe,
Tip
Type: Posts; User: als
I do a basic alignment and then do one side at a time. Works well for me,
Be safe,
Tip
From what I can see I like the additional "high" brake light - however I do not care for the "pulsing" of the light . I find it very distracting.
Very nice concept.
I tried the Madstad on my "17 Base model F3. It had a light tint - wider and taller than standard.
I found that at highway speeds it was not as stable as I thought it should be. Also it allowed a...
I have never understood the need to apply pressure to the idler pulley. I set mine to barely clear the belt when not on bike.
I have close to 20 thousand miles on my BRP idler and have no complaints...
Congratulations !!
Now you have all winter to "Farkelize" it.
Enjoy !!
Mine did not come from a perfect world - when new and not lubed I fought it many times.
Lube it (I use waterproof plumbers grease) and turn the key as Ann suggests - absolutely no problems since !
Removed
I am going to put my F3 on blocks this winter to give the suspension " a rest " Used to do this after each night of racing with a late model car I helped on. Makes sense to me.
I have Harley bags on mine - but I do like the look and idea of yours !
Hi,
It works if the auto drivers are paying even a little bit of attention.
Last month I was stopped at an intersection ( red light ) on rte 50 in Winchester, Va. A car went by me going at least 35...
You give yourself credit for being a tire expert - NOT ME !!
I was selling and and installing tires while you were ********************* - but I don't claim to be an expert
It seems some...
Is your safety worth the discount??
My best so far has been my Spider Extras bar !!
I have a "17 F3 base model. Changed the sway bar for one from an Rt. Made a nice difference - however I have been really curious about the next upgrade.
Finally decided to get one from Spider Extras...
From what I have seen - plus my own - the guards are larger than your hand on the grip and also farther forward.
Very nice - one of the few I would like to attend !
Sure looks like a fun group !
On my '17 F3 - so far - my floorboards !
The important thing is "if you have it when you need it! Don't go looking for trouble just because you carry.
My thoughts!!
My '17 F3 base model @ 60 mph is turning 3000 rpm's
Nice Job !!
Can Am is blowing smoke where the sun doesn't shine !I am on my second F3 base model - first one was replaced after replacing everything that turned plus the transmission.
Finally gave me a new bike...
Why not elongate the holes in the bars ??
Might want to check the internet - Loispowersport in Greenville - and some of the sponsors on the forum.
Some dealers will ship them to your door.
Good luck,
als
I don't agree with them - however when any person backs their statement up with their credentials they should be willing and able
to verify them. If not it is basically just " my opinion ".
I am...
Per BRP spec's the '17 RT Limited weighs 1012 lbs. and the F3 T weighs 948 = 64 lbs.
Keep it honest!
Have a nice day and enjoy the weekend,
als
If I offended anyone - unprovoked - I apologize.
When I make a plain statement or ask an honest question , I do so to get an honest answer. I don't need to be belittled or made to feel stupid.
I...
There are 2 trikes in the picture
There is no reasoning to a "Legend In His Own Mind" !!!
If the discussion doesn't fit your answer we are idiots -uninformed - or didn't graduate from high school (whatever that has to do with this...
I didn't forget anything! Are you telling me that the Spyder is perfectly balanced with equal weight on each wheel?
Especially with your "500" ponds mostly to the rear?
After reading many - many opinions of needed tire pressure - it seems that no one wants to mention that the Spyder weighs almost as much as some tires are designed to handle.
If it is carrying the...