Search:

Try emailing this guy: bestshopmanuals@gmail.com Very helpful and you can print if you use the adobe software.

Hey Pete! noticed your location, I worked with Aussies years ago (40 yrs ago). They were here working weapons separation from aircraft; great guys! Best to ya!

JOb complete! Took me almost as long to put the tupperware back on as it took to repair the wiring!! I took the 1st piece, the long one from the front to under the tank, off many times trying to...

I'd replaced them with hex head if i were you! I bought a used Spyder and the mechanic who did the 1st service messed up the torx drain ( I know because I have the service receipts from the previous...

2 of the wires in the harness have been chewed apart by a rat, a big FAT RAT! 2 big rat traps baited and ready for the sucker tonight!!!! Fortunately, there's about 3 inches of wire left on the...

thanks much for your input, it is very well done!

UtahPete, do you know where I can find the ground? I have a service manual and all those components have a common ground, but it doesn't say where it is located. Thanks

Actually, I was in front of the bike and thinking left/right fuse box. I did check all the fuses related to engine, ECM and cluster on both sides. All of the fuses were good. Thanks for the input

Thanks larryd. I didn't have to take any electrical connectors apart to install the riser.

I did check the kill switch, in fact I tried it several times today. I think that the cluster should display even if the kill switch was bad, but don't know for sure

Is there a ground associated with the riser? I noticed on the wiring diagram that all of the components that are NOT working are on the same ground wire! It's JT BK 5

I have 3 keys for the bike and I tried each of them, no cluster lights and bike will not start. I didn't think the handlebars had anything to do with the problem, so I removed the RHS covers and...

I just removed all the tupperware on the RHS and traced the wiring harnesses from the left and right sides of the handlebar down to the receptacle plugs on the left side of the engine. The...

So right! Sorry about that, I was in a hurry to get to an appointment.....it's a 2020 Spyder RT Limited. I have checked all the fuzes in the right side box and the wiring connections on the right...

I added the taller risers and now I have no console display and the bike will not start. The lights come on and the horn works. Obviously the change caused the problem. Being new to the Spyder I'm...