Both of my 12v power plugs are wired to the factory harness hot 24/7. Since the wires are already there couldn't they be moved to a circuit that is switched? Sure would be one heck of a...
Type: Posts; User: JoeUpchurch
Both of my 12v power plugs are wired to the factory harness hot 24/7. Since the wires are already there couldn't they be moved to a circuit that is switched? Sure would be one heck of a...
Hi Billy, thanks for your reply. I've added 2 dash cams to my 2012 RT ltd & replaced the batteries with capacators so that they will switch on when power is applied and off when I switch power off....
Thanks, J.D. I appreciate your time.
Sent from my iPad using Tapatalk
Thanks for your reply J.D.,
Where can I get the "FZ-1 fuse block" and how to install it?
Thanks so Much
Joe Upchurch
When I bought my 2012 Spyder RT Ltd I had the dealer install 12v power outlets in the frunk and the back compartment on the side opposite the ipod plug. It appears that they are both "hot" all the...
After getting it home I started and stopped it a dozen times with no problem. Got it up to operating temp - still couldn't duplicate "won't start". - tomorrow I'. Try shutting down in neutral to see...
Switched the relays, new battery, new starter, checked & tightened the grounds.
Sent from my iPad using Tapatalk
Last Friday Can-Am agreed to warranty the starter and Columbia Powersports (Chris) got it and installed it this morning - After all this they even comped the $50.00 Best PLUSS warranty deductible. ...
Are there any electrical engineers out here? On May 28th I got the "click click click - won't start" from my 2012 Spyder RT LTD and thus began three months of not being able to use my machine and...
I've been trying for two years to get My 2012 RT Ltd complete CB AM/FR stock wired communication system to work so that my wife and I can converse while riding. I have to be very attuned to her...
One more observation about my 2012 RT Ltd not starting. The next day (after dealer found ground wire to the oil tank loose) I rode for 100 Miles to Ricky Clayborn's house for his laser alignment and...
Seems there are 3 major chassis grounds, anyone know where the third is ?
Sent from my iPhone using Tapatalk
Dealer's tech says ground wire to oil tank was loose, tightened it - started right up - happy to be riding again!
My dealer's tech says the ground wire on the oil tank was loose. Now runs as designed. Dealer covered under warranty. Happy to ride again!
If the main ground (under the seat) were loose causing the starter not to work, would that not also cause some of the other items not to work ie the console, the acc plugs, etc. Everything else was...
I am really perplexed with my 2012 Spyder RT Ltd. I had to have it towed to my dealer and now he tells me that the reason it wouldn't start is because the chassis ground was undone. In other words...
Billy, how could this be? The jumper post was a solid connection to the battery, the dealer mentioned that they should have caught it at the 4600 inspection - just makes no sense to me - I made sure...
Chris ( from my dealer) called this afternoon and informed me that my Spyder was fixed and that the problem was that the chassis ground had come undone. Can anyone tell me where the chassis ground...
Sorry, for specifics the load test showed capability better than 400 CCA - with battery listed at about 350 CCA, I call that "passing the load test".
I got the trunk light and "Bright Sides", HID headlights and Fog Lights - use them all, day or night - I think anything else on a 2012 LTD Limited is overkill for safety unless you're thinking...
sure will, thanks for your interest!
Had my foot on the brake every cranking attempot for 2 days
I guess it's on to my dealer now - have no trailer - we'll see how well BEST PLUS works!, to be continued
Thanks for the effort of reading and replying to my problem.
And, of course, hasn't thrown the first code - checked that before and after on and off and start failure.
Only relay I didn't pull was the "rectifier" under the plastic - put the plastic back on without thinking.
Says in 1st gear but I can't get it out. Always cranked in first gear in the past.
If it is the kill switch it would be broken - checked and double checked each try.
Hi everybody,
I've read every post I can find on this subject, pulled every relay, pulled and checked every fuse, tightened every battery terminal, unit shows 12.8 at the battery and the frunk...
I've got a 12 foot trailer ordered with a dove tail that I'll be pulling with my Frontier.http://www.spyderlovers.com/forums/images/icons/icon6.png