Thanks for the info. Oddly enough my buddy was back working on it today and he said that the reverse actuator locked up on him and the bike wouldn't shift into reverse any more. He already placed the...
Type: Posts; User: F3VE
Thanks for the info. Oddly enough my buddy was back working on it today and he said that the reverse actuator locked up on him and the bike wouldn't shift into reverse any more. He already placed the...
yes I had the the big wheels on at the time of the incident but we put the factory wheels back on and the exact same code pop up upon test ride
yes this is the same issue. The shop couldn't find a fix for the gobs issue so one of my buddies are helping troubleshoot the issue. I'd thought I start a new post being this one was a bit old
2018 F3 with GBPS issues & code P0730 - any Help?
I have a 2018 Spyder F3 that's getting the P0730 error code. I did the EMC Reintialization & also relearnt the gears, then went ahead & replaced...
right
I will most definitely mention this, I know the oil is ok. Dealer changed it on last maintenance. I’m thinking the culprit came from dodging the deranged drinker and me jumping the curb. That’s when...
The right side
No they had to order it now I don’t know if they sent the old one in to be tested I’ll have to ask. This has been about a month long process as well..
Hey guys, I have a 2018 F3 Spyder and a bit of back story. An idiot cut me off in traffic which caused me to jump a curb. I had no real damage but took it to the shop anyway. They inspected my bike,...
2018 Spyder f3 SE6
Can someone instruct me on how to replace the parking brake sensor that’s on the front right knee side of the bike parking brake light won’t go off and it beeps. The sensor...
Any one know how to remove parking brake switch interrupter on 2018 f3 it’s mounted with pop rivets I believe?
*Update*
So I replaced the speed sensor on the rear wheel took it for a spin and all the codes cleared everything a-ok.
Note I had to get it up to 40miles before the codes would reset!!
If the notched speed wheel have scuffs/ small scrapes on some of the notches would you consider that damage and could it cause the speed sensor not to read I clean the notched speed wheel last night...
If rear wheel speed sensor needed to be replaced, would it or the codes need to be reset by the dealer?
Yes I replace all three wheels all are the exact same size.
Yes I check the washer in the speed sensor they are 2 slots one slide over the sensor head the other is to bolt it all together. As for the brake caliber I did not notice any washer or shims missing ...
Hey guys
I’m getting abs/vss fault codes on 2018 can am spyder f3 it’s has also gon into limp mode after replacing wheels.
Codes:
C003a
C006c
U0416
I suspect it’s the C003a rear wheels speed...
Yes your right Mike
The ride isn’t as smooth but it isn’t that bad though, only when I hit big bumps in the road you can really tell the difference but the circumference the new wheels are spot on...
Thanks!
Yea you have to kinda choose between wheels and fenders unless you find someone who custom make the fenders.
Here are a couple of pics 179567
179568
Yes I call allthingschrome they make the rim with a sealed bearing already installed so all I needed to do is place bushings inside and tighten everything looks to align perfect. Just need to take...
Thanks a lot I will contact allthingschrome and ask why they didn’t supply me with the seal either way I’ll visit local parts store
Thanks
Thanks for the info that’s what I kinda figured.
I will post pics when wheels are fitted.
Hey guys
Wondering if someone can help me out I’m am putting custom 20inch rims from allthingschrome on my F3 (all 3 wheels) I remove the rear wheel with no problem Remove all parts from factory...