Search:

For no other reason than to chat a little, using the PQIA oil analysis, most of the Delo looks like a good enough product for wet clutch operation with the exception of the SDE version of the DELO...

Well if the oil change fixed it, good for you! However, I can't really not fathom how 10,000 mile oil could cause the issue you have cited...unless the oil became highly diluted with something that...

If you check out these pages and consider them a little, you'll will have your answer I believe. FYI, the Moly levels are good for the wet clutch. I've long used T6 and believe it to be very good....

I have never really considered time or distance the defining criteria, more about riding style for me. I'm "Riding" when I go out and spend almost all of my focus on the road because of the way I'm...

Hi Stefanie...Congratulations on your adventure into the Spyder world! I had a similar choice to make not long ago with a few additional considerations. After some thought and not being under any...

Well riding a while is a relative thing. After riding two wheels for more than 40 years I purchased a used 2018 F3L with about 2000 miles on it in the Austin TX area. After riding it home about 165...

Not sure if the BRP 900 Ace by Ski-Doo is the exact same engine as the Spyders, but the Specs say- Engine: 900 ACE™ Turbo R
Engine details: Liquid-cooled, four-stroke D.O.H.C., dry sump,...

Just an old Japanese bike rider here wanting to suggest a few things for BRP. A) Maybe put your engineers to work on finishing the current product line first before trying product extension to...

I bought this one on sale for something like $170 for a 2018 F3L: "OTC 1545 Ultra Low Profile Motorcycle and ATV Lift with 1,500 lb. Capacity" -...

This topic touches on emotions like an oil question, and this read might renew a good flogging! http://www.mototuneusa.com/break_in_secrets.htm, ...Regards,:bdh:

This is what was found with a little search- https://www.hondaprokevin.com/new-2020-honda-neowing-motorcycle-trike-patents/

Regards,

:agree: as I had a similar issue on Nov 24, 2018, which caused a stroke limiting my left side movement/usage. Every one is different, but I know of some of the difficulties. God Bless you both and...

Well let's see, the GS had about 119 HP and 88 lb.ft of torque and a wet weight of 500lbs., the Spyder has 115hp and 97 lb.ft of torque and weighs 900 lbs. with at least 3X rotational mass to...

Well like you Mike, I'm not a big fan of some of the oil check processes I've read and I typically end my ride with about a 1minute idle while disrobing the riding gear which takes me a little more...

The Woodlands, some still call it Spring.

Well..To finish this thread, had the alignment completed today and rode it back home just over 170 miles. The result is more than a modest improvement for my bike and riding style.

Although the...

Thanks Wood, yes I actually found this dealer through a list of ROLO Laser dealers I had run across here- http://www.spydercomfort.com/dealerstx.htm. Regards.

Hi Mike thanks for the feedback! I will be using a dealer by the name of Broadway Powersports in Tyler Texas. It is a few hours ride north of me, however I liked how the shop mechanic spoke on the...

Well I'm new to the Spyder, but have done a fair bit of car and bike work over the years, your description reminds me of a similar issue I chased on a car some time back. What I found was front...

I'm having a laser alignment this Tue on my 2018 F3-L with a total of 3600 miles on it. The Spyder does not pull to the left or right, rather it is very abrupt turning to the right at 40 mph or...

Received my 20" for 2018 F3-L today. Installed in about 45 minutes. I t is a nice windshield that is much thicker than the OEM unit. In the fully down and upright position I do get a little...

Those images represent a lot of work, frustration and winning determination! Bravo and thanks for the photos! Regards.

This may help: https://www.spyderlovers.com/forums/showthread.php?140770-Removing-Front-Drive-Sprocket-(that-has-significant-wear)


good luck...Regards


Sorry I see you have resolved, IGNORE

You guys might want to try this product: https://www.tsmoly.com/grease-spline-grease-p-367.html or this one:...

Old thread, but thought I'd post regardless....I have a 2018 F3-L with about 2300 miles on it and on the ground I have a Kritkit gauge reading of about 150 pounds and a Gates Carbon Drive App for my...

Yes, but blue this time!

Just a quick thank you for your suggestion. I ended up using a torch to heat the bolts(still stripped one hex head) then drilled and easy-outed the stripped bolt...turned into a 3hour project... ...

Left side floorboard came off easy, and I saw the yellow thread locker. Will get a second and third hand assistance for the right side board...Thanks, Regards.

Well as mentioned in my first post, received the Spyder F3 number 4 UFIT floorboards today. Attempted to remove the two number 7 hex screws holding on the oem floorboards. No joy, not even a small...

Just a quick follow up on my post....Picked the Spyder up in Austin yesterday, rode it a little over 200 miles home on a warm (75 degrees) day, but windy! I Already like the machine. The advice to...