Search:

Type: Posts; User: Rattlebars

Page 1 of 13 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    12
    Views
    247

    HowTo: Here are the parts I bought and made. Advantage...

    Here are the parts I bought and made. Advantage is getting a torque wrench for 180 pounds in the mix. Minimum for the belt is 1mm or 0.04"

    >36mm socket which works with the oil filter too<

    >1/2...
  2. Replies
    8
    Views
    203

    You can build your own heated grips for much less...

    You can build your own heated grips for much less (under $30). If you don't like them, you can go with BuRP OEM. Check my >Page for Heated Gear<.
  3. Check your mileage when you have a comma after...

    Check your mileage when you have a comma after the second ODO digit. 1560 is nothing, 15,600 will show a big difference.
  4. Replies
    46
    Views
    1,370

    Would be helpful to know the tire change... from...

    Would be helpful to know the tire change... from what to what?
  5. It will improve as you stack on miles and parts...

    It will improve as you stack on miles and parts "set" in. with 13K on the clock I get 200/tank on 87 octane usually. On the highway more, up to 230. Stop and go kills mileage.
    Personally, I don't...
  6. Replies
    12
    Views
    438

    My Kenda showed cords at 11K. Khumo ECSTA AST ...

    My Kenda showed cords at 11K. Khumo ECSTA AST 225/50R15** went on. Working and looking good. I'm happy with the Khumo ECSTA AST 225/50R15 H rated that I put on recently. Another ryder had some...
  7. 1330cc: Hot glue will work as non-corrosive thread lock.

    Hot glue will work as non-corrosive thread lock.
  8. Links are useful ...

    Links are useful

    https://www.ssvworks.com/product/Can-Am-Spyder-F3-2-Speaker-Audio-Kit
  9. Replies
    15
    Views
    419

    Use the USB with your iPod (any version). It will...

    Use the USB with your iPod (any version). It will give you a readout and will respond to the handlebar controls. It works with my son's original hard drive iPod 1 to my 5th gen nano.
  10. Replies
    8
    Views
    297

    I would suggest marking the "outside" with a dab...

    I would suggest marking the "outside" with a dab of paint and taking a photo of it before you remove it. When I do something like that, I always take several photos of the process. Digital photos are...
  11. Replies
    46
    Views
    1,370

    Never thought of that. Great idea. I will try it!...

    Never thought of that. Great idea. I will try it!

    >Belt Dressing<
  12. Replies
    37
    Views
    1,372

    There is no vent in the OEM system. The cap vents...

    There is no vent in the OEM system. The cap vents into a bladder which expands with a pressure of one atmosphere as the fluid gets used by the wearing brake system. The fluid chamber itself is air...
  13. Replies
    6
    Views
    332

    HowTo: I'm not sure that's the right circuit. GPS power...

    I'm not sure that's the right circuit. GPS power is different and comes on with the key. It will be a >2 PRONG CONNECTOR< with a blank in it. Next to a male 1/8" AUDIOheadphone plug. When you pull...
  14. Replies
    37
    Views
    1,372

    :agree: Especially one that's been unsealed. Life...

    :agree: Especially one that's been unsealed. Life of an unsealed Brake Fluid can is only a coupla weeks.
  15. Replies
    46
    Views
    1,370

    That showed itself after installing Lamont's...

    That showed itself after installing Lamont's roller on my BRP idler. It's mostly dust.
  16. Replies
    46
    Views
    1,370

    As promised. My whine is gone for the most part....

    As promised. My whine is gone for the most part. It was more of a whistle. My belt tension was about 110 (low) and my belt was 3.2 mm from the inner rim of the sprocket measured with a digital...
  17. Replies
    46
    Views
    1,370

    It is possible that the rust/corrosion on the...

    It is possible that the rust/corrosion on the shaft (not shown) can become attached to the wheel bearings (oval 33) and/or the inner spacer (square 32) and need a bit of persuasion to remove after a...
  18. Replies
    46
    Views
    1,370

    Here are the readings for the Spyder belt reader....

    Here are the readings for the Spyder belt reader. What the scale is and what the manual says vs the app, I can't say.

    174598
  19. Replies
    46
    Views
    1,370

    Just a note for the Krikit. Get the Krikit TWO,...

    Just a note for the Krikit. Get the Krikit TWO, with the range needed for this belt. There is a lighter duty one that won't work. Of course, I didn't know that and when there is a 50% 50% chance,...
  20. Replies
    6
    Views
    332

    HowTo: Here is where I found mine on the 2016 F3T. Full...

    Here is where I found mine on the 2016 F3T. Full details >ON MY PAGE<.

    174529
  21. Replies
    46
    Views
    1,370

    Biggest question is... how much does an idler arm...

    Biggest question is... how much does an idler arm change the tension number????


    https://www.youtube.com/watch?v=0_Ewxr7qwqo
  22. Replies
    13
    Views
    575

    Look through. My preference. F4 tall. There is a...

    Look through. My preference. F4 tall. There is a good amount of air coming through the space at the bottom inherent. I don't like vents and have one without. Vents do just about nothing on the F3...
  23. Thread: Towing

    by Rattlebars
    Replies
    13
    Views
    501

    Belt removal is somewhat easy. Just pull it off...

    Belt removal is somewhat easy. Just pull it off the rear sprocket and tie it up out of the way. Don't forget to release the parking brake (beeper will stop after about 30 seconds).
  24. Just curious. Does the new place have a garage?...

    Just curious. Does the new place have a garage? If so, leaving the cars out temporarily and putting the bikes in the garage would be a better option.
  25. Thread: Security

    by Rattlebars
    Replies
    16
    Views
    683

    The brand name on the bike is enough of a...

    The brand name on the bike is enough of a deterrent. Not HD. And the starting sequence is a nightmare. The engaged Parking Brake is definitely not going to make it easy to move and it can't be...
  26. I have a a nut I could send you. Your dealer or...

    I have a a nut I could send you. Your dealer or anywhere that sells motorcycle batteries should have some lying around for free. PM me your address and I'll post it today. When you install it, put a...
  27. Do you have room for one of these while you...

    Do you have room for one of these while you build. Covers are a pain to put on, take off and store. One of these portable garages work great and cost about the same as a single cover would. Half the...
  28. Replies
    5
    Views
    313

    have used this Merino Sheepskin Rug for $60...

    have used this Merino Sheepskin Rug for $60 <--click) with great success. . If you have a backrest, just cut mark and cut appropriately. Remove and wash. If it gets old, just get another - it's cheep...
  29. Replies
    10
    Views
    469

    So it's on you?? Did you leave it loose?...

    So it's on you?? Did you leave it loose? Inquiring mind want to know.
  30. Replies
    10
    Views
    469

    You are a lucky man.

    You are a lucky man.
Results 1 to 30 of 366
Page 1 of 13 1 2 3 4