Search:

Type: Posts; User: spyderfish

Page 1 of 3 1 2 3

Search: Search took 0.02 seconds.

  1. Replies
    12
    Views
    583

    I believe the fuse is there to protect the wire...

    I believe the fuse is there to protect the wire from overheating. In home wiring, 14 gauge wire should have no greater than a 15 amp fuse, 12 gauge wire is 20 amp. I think 12 volt systems are the...
  2. Replies
    1
    Views
    322

    I cut it into pieces to get it out, installed JT...

    I cut it into pieces to get it out, installed JT air filter. Lotsa room there without the air management bloat.
  3. Replies
    5
    Views
    540

    2013 STS Magnesium Panels

    So I finally bit the bullet and upgraded the side panels on my 2013 STS. This the kit that includes 4 new panels (2 right 2 left), with the air scoop design to increase flow and decrease heat.
    ...
  4. Replies
    13
    Views
    1,342

    Have the CalSci extra wide and tall. Holes were...

    Have the CalSci extra wide and tall. Holes were drilled correctly, install was quite easy.

    Makes a big difference, no head buffeting. Hands still exposed, using heated gloves.
  5. Replies
    14
    Views
    560

    Group Rides - Tail Gunner ???

    Been on many group rides over the past 3 years, all fun, some more than others. No news here, more riders means slower progress,
    delays and greater possibilities of group segmentation and/or cage...
  6. Review: All thumbs up for River Raisin Powersports

    Went for service today at Raisin River, Monroe, Michigan; always good outcomes. Curtis and team are honest, fair, and most important, the work is quality.
    :2thumbs::2thumbs::2thumbs:

    New laser...
  7. Replies
    19
    Views
    1,089

    Had exactly the same problem with STS, even...

    Had exactly the same problem with STS, even though they are different engines. Problem was solved by removing the spring clamp and replacing with screw clamp.

    The issue is probably getting access...
  8. Thread: Biker Beads

    by spyderfish
    Replies
    13
    Views
    874

    I use them in the summer, they work for me, cool...

    I use them in the summer, they work for me, cool and dry. I will ride with them on for a few hours, and then take them off for an hour, repeat all day The variation is good, pressure points are...
  9. Replies
    31
    Views
    5,051

    Have had one for Bout 10 years

    Quality construction, holds charge well. Used it for bike tires, now spyder tires.


    It is slow however, it will top off tires, but don't think
    it could fill back tire from flat on a charge,...
  10. Replies
    14
    Views
    1,198

    More Rack Info

    I needed more storage on "Blaze" 2013 ST. I added the Showchrome Hitch and Showchrome rack.

    Completely unacceptable strength and durability and size. Called Showchrome, they would not offer any...
  11. Replies
    2
    Views
    472

    You got it, BlueKnight

    I am staying at the Baymont down the road, but will be at GEL for events and rides, look forward to meeting you.:clap:
  12. Replies
    2
    Views
    472

    Rotella T6 - Great Deal

    For all you 1330 owners who change their own oil.

    I did not do enuff research, and I have 2 sealed gallons of Rotella T6 purchased new in March.

    Good oil for 1330, not so good for 990.

    2...
  13. Replies
    11
    Views
    1,543

    How much drop, how long, gradual or rapid...

    How much drop, how long, gradual or rapid recovery?
  14. Replies
    0
    Views
    362

    2013 ST Cannister Available

    Took off the emmissions cannister. No gas contamination whatsoever, as I relocated the cannister to be above the level of the gas tank in 2014. I removed the cannister because the purge valve failed...
  15. USB power for Android

    My Android phone will not run GPS guidance from a standard USB source, the battery becomes discharged. The phone came with its own
    "turbocharger" which is a high power charger and does provide...
  16. Replies
    5
    Views
    661

    Cannister is gone, so are the fault codes

    Thanx SL people for all assistance. Cannister had no fuel or fuel fumes when removed. Purge valve was open when I looked at it on the bench.
    Might be a possibility of fumes from a hot soak, time...
  17. Replies
    5
    Views
    661

    Thank you for the information. I was considering...

    Thank you for the information. I was considering removing the cannister completely and plugging the vacuum line. Sounds like a good time to do that.

    If I remove the purge valve completely and...
  18. Replies
    5
    Views
    661

    Purge Valve Function

    2013 STS, recently having some issues with an intermittent fault code P1175. Machine runs well, no obvious degradation. Searching knowledge from SL seems to indicate purge valve could be at fault....
  19. Replies
    12
    Views
    784

    Have the same Issue

    Daniel,

    I have exactly the same issue with the SC hitch. I also replaced the crappy steel set screws with stainless hex head bolts, which helps keep it from banging.

    I have not verified this...
  20. Replies
    8
    Views
    423

    ShowChrome, Big Bike Parts

    They make a rack 10 x 15, fits on a regular trailer hitch. Limited capacity weight,

    http://www.bigbikeparts.com/templates/product.aspx?ProductGuid=52-828&GroupGuid=67
  21. Sound Level ST versus RT

    Just got in from 100 miles, paying a lot of attention to the sound. I noticed a lot of sound comig up at me from around the bars and steering column Notice in the attached pic, the steering column...
  22. Sound

    Sound level seems the same, loud enough for ear protection when accelerating. Foam might help, but I am dubious. The new open space above the engine is great for cooling and access, but is does act...
  23. Here are some before and after pics showing the...

    Here are some before and after pics showing the filter before and after pie plate water shield. The filter attachment in the center is actually a bolt with lock washer, not a threaded stud, bad...
  24. Unlikely, but possible

    Spyderfish here, 2013 STS, with JT air cleaner. Love the filter, takes away the need for the external scoops, allows access to the engine, and adds a certain edge to the soundprint. Here is what I...
  25. Replies
    3
    Views
    447

    Thank you AeroPilot!!

    I was looking for a dangling pigtail. Maybe time to call the eye doctor, thx again:clap::clap:
  26. Replies
    3
    Views
    447

    Frunk Power Connector

    Attempting to add 12 volt power to frunk on 2013 STS. Purchased outlet from BRP, pn 0000754610, mechanically, fits the frunk.

    Problem is, I cannot find the.power connector. Frunk is removed in...
  27. Replies
    7
    Views
    1,235

    Mystery Electrical Connector

    ST Folks,

    2013 STS, during an oil change I noticed an electrical connector hanging down near the oil drain plug, near the floorboard. I can only see the end of the connector, it appears to be...
  28. Thread: Hot thighs

    by spyderfish
    Replies
    19
    Views
    1,742

    Part Number for kit?

    Do you have a part number or link for 2013 Magnesium STS??

    tia,
  29. Replies
    7
    Views
    1,195

    Elka Model Number

    GearHd,

    What year is your STL? Do you know the model or style of Elka shock? Did you install it yourself, big job? Was there a big difference?

    Thx,

    Spyderfish
  30. Replies
    18
    Views
    1,512

    Solvents are dicey

    Steve and Belinda,

    I do believe there is any solvent thatwill dissolve the sap without harming or at least marking the cover.

    I have had some luck over the years with sticky stuff using a...
Results 1 to 30 of 63
Page 1 of 3 1 2 3