Search:

No, it hasn’t been verified he has a bad DESS module, and that’s my concern, too. Looking at his previous posts in his other thread, all he was getting was Bad Key. That seems to be all you get if...

Dan, I think it's time you got yourself a Service Manual. 25 bucks.

https://brpmanuals.com/product/2010-2011-can-am-spyder-rt-series-repair-and-maintenance-manual-master-collection/

Here's why....

and..how many miles on the machine? Are you due for an HCM filter change. Sounds hydraulic pressure related.

Hey Lefty. You have narrowed it down to the belt, which is good. It's not a bearing or anything like that. The belt is much more kevlar than rubber. You didn't hurt it with the belt dressing. It's...

Cool. Will be interested in how that works out.

Any chance that either the ECM or the Cluster has been replaced over the years? That screen isn't addressed in the manual. If it was a serious problem, you would get this screen instead, (see pic),...

Rick. Software updates are embedded in BUDS, and BUDS2 for that matter. The latest version of BUDS is version E3.8.2.1, last updated in 9/23/2016. (Menu Bar-Help-About BUDS) So, when you downloaded...

First of all, Steve; left hand and right-hand sides of ANY vehicle will always be referenced from the aspect of the driver when they are in/on the vehicle. The transmission filter on the 1330 is on...

Actually Maisy, on your engine there are two knock sensors. Just by the way you phrased your question, you don’t seem to be aware of that. So, what’s going on and why do you think you have a knock...

New Spyder. New pads. New rotors. Did you bed them in yet? My brakes will lift me off the seat hardly trying.

Turn on the radio and push on the soft pads. What happens?

Hey Jason. I know nothing about Rykers. But what is disturbing to me is the dealership. If I've read this correctly, they didn't disclose to you that the machine was used as a trainer until AFTER you...

Hey 5speed. I agree with Allen on this. BRP has made some changes to the programming since the beginning of the 1330. Just the other morning, after a particularly nippy night, my 1330 took at least 5...

Same place. Under front, service cover below the headlights, right hand side..

Hey Brent. Well, just in case you wanted to stick with the gold plug, the engine plug is the MP18. Their year, make, model search is a little screwy. If you go back to 2020 or so, Can Am shows up and...

Here's the thing I'll disagree with about what your dealer told you. The Left Hand Multi-function Switch was re-designed with a new one for Model Year 2022. The new part number is applicable for the...

Hi Nerds. So, to make sure I understand correctly, you are trying to turn on the Left Turn Signal. The switch itself slides over to the left just fine. But, when it is all the way over, you still...

Hey David. Yes, it may set off warning lights, but after you put all 3 wheels back on the ground and start riding, they will clear themselves.

O2 Sensor? Ride it for a few miles. Allow time for the ECM to re-adjust to having a good sensor again. It may also take a couple of operating cycles for the light to clear.

Try looking at this. They call this the blow-by connector. There's a vent tube attached to it. You can remove the vent tube and check things out. There's that o-ring shown, and also what they call a...

Byron, I didn't fix it. It would work well enough to return the paddles to neutral. But, it was very easy to accidentally downshift if I put my hand in the wrong place. Start up BUDS on you computer...

Hey Byron. Checked oil level lately? Typical issue when having up shifting issues. The switch only has an up shift and a downshift contact. First and reverse are working. Sounds ok. But find the...

Hey AJ. I’ve got a problem. I try to connect dots. It’s a birth defect.

So, you said that everything was perfect with this motor. Then the previous owner touched it and did an oil change. Then,...

Searched the forum for your P0520 code. There was a cluster of reports of oil pressure switch failure from that 08 and 09 era Spyder. It’s just a switch, not a sensor, per se. The new switch you have...

Just how much longer is he going to keep it? There's always a wash down with Gunk Engine Degreaser.

Anyway, Have never done the gaskets but have removed the intake system. The biggest issue with...

Hey NoTyme. Sorry about the terminology confusion. When I say top case, it was referring to that big, storage case that sits on the top rear, behind the passenger. As shown in my signature photo....

Also leaning towards the compressor. So, Zame, in order to eliminate the compressor, do this. It’ll only take you 10 minutes:

Open your fuse box and remove relay R1. See pic. The only thing that...

You have it, you just need to find it. The 2023 has two places you can grab 12v power. One is on the right hand side where BRP got power for the factory installed GPS. Lamonster has a power cable...

Yes. Johnny K’s in Lodi. aka Burbank. 46 miles. If your machine has never been laser aligned, they can do that, too.
...

Well Bob. It appears that the message is about the rear suspension. Let’s go over the most common. If it isn’t this stuff, then we’ll need more exact information about the message and the code.
...