If the trailer has a 6'x12' bed, then your spyder will fit.
If the ramp is also 6' wide, watch out for loading problems if the incline is too steep.
Good Luck, :thumbup: Bill.
Type: Posts; User: Knizar
If the trailer has a 6'x12' bed, then your spyder will fit.
If the ramp is also 6' wide, watch out for loading problems if the incline is too steep.
Good Luck, :thumbup: Bill.
:oldpost: 2019' :oldpost:
"Lick your wounds" & order a set from Lamonster Garage!
You will get the RIGHT ones!
MHO,:thumbup: Bill
We all feel sorry for the people that did not get what they paid for; BUT, complaining to the rest of us here on Spyder Lovers Forum is not helping your case.
Those of you who have an ample...
I run the Altimax 45 in 215/60R15, it's a few pubic hairs narrower than stock, but not as likely to wear-out the center. I have 6K on it now & it's wearing even across the face with 7/32" tread left....
Bobby, I believe the late model 2021 RT's came out with the belt tensioner.(vibration Damper)
So if you do decide to purchase one, definitely go with the best and get the one from Lamonster Garage....
My 2020 RTL did NOT come with one, and with over 34K miles I have not felt the need for one.
I do not believe any of the 2020 RTs came out stock with the tensioner.
Your call, :thumbup: Bill
If it were me, I would turn it into an insurance claim, your comprehensive insurance should cover it, ask your insurance provider. I carry full comp on my vehicles.
MHO :thumbup: Bill
You have our sympathy, Bill & Peggy:pray:
I'm really not worried that I will be the ONLY one left, but what the hell, I've always been kind of a loner!
I believe "Ultimate Seats" offer two different length seats for the driver; one provides about 2 inches more room for the driver before the rise to the passenger's portion, but this is in a one-piece...
Personally, I would remove the tire and access the problem. Maybe just needs a screw or two. The fender can sometimes be awkward to handle , plus wiring, and remounting. MHO :thumbup:Good luck, Bill
I have to say that the first and probably best thing I purchased from Lamonster Garage for my new 2020RTL was the handlebar riser, which took away the pain in my shoulders.
Next best purchase was...
Did you try jacking it up and spinning that wheel?
Congratulations on your new ride:congrats::clap::2thumbs:
You definitely got their attention, now we all have to give them a chance to fix it!
I believe I read something about the 2024 bars being a different size than the previous 2020 thru 2023, that the spyder cuffs on previous RT's didn't fit on the new 2024 handle bars. :dontknow: ...
You might check the drive sprocket for the "Red Dust", if your F3S hasn't had
that sprocket changed it is probably due! The white sprocket is NOT the final fix.
My 2 cents worth,, Bill:thumbup:
Honestly, I think they don't look that bad!
I have 34K on my 2020RTL, I'm going to hold off until 50K unless I detect a misfire.
Maybe a mistake, but really do think that 50k miles should...
I've seen that look, in triplicate!:roflblack:
I vote a "BIG NO" on 185/55's! Your looking for trouble with fender clearance.
I have 175/55R 15 on my 2020RTL and they just clear with no extra tolerance.
MHO :thumbup: Bill
Which makes sense to me, and should probably have the drive sprocket and rubber cushion bumpers installed too.
As much as to say a spin balance with the rear wheel mounted on the motorcycle.
That...
You will not regret it!:2thumbs::welcome: Bill
My 2020RTL will beep for about 15 seconds, definitely NOT 20 MINUTES!
OK! So enlighten me, never to old to learn! "What the :cus: is a Flux Capacitor?":hun: Bill
OOOPS, found it! at the parts store next to the blinker fluid and above the muffler belt.
:agree: What I said in post #4.:thumbup:
Maybe for aftermarket lighting on passenger foot pegs
Aftermarket Horn!
Me 2 !:agree:
Anything Kenda has a less structural carcass, and probably not be under inflated.
MHO Bill
:yikes: Rattle Can?:dontknow: Really!
I know the BRP paint job sucks, But a rattle can?
Go check with a Body Shop 4 a $ quote first.
Your wife WILL Notice if the spot in question is in eye...