I used this on my RTS and my new RT but I think it will probably work on the F3
https://www.amazon.com/gp/product/B007AM1PXW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Works Great!
Type: Posts; User: RanHag
I used this on my RTS and my new RT but I think it will probably work on the F3
https://www.amazon.com/gp/product/B007AM1PXW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Works Great!
One other item. I used this mount for my mug holder.
https://www.amazon.com/gp/product/B007AM1PXW/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I have a 2011 RTS. I was at a Spyder rally in Springfield back in 2012. There was a vendor that was selling a bolt that replaces one of the 4 bolts in the handle bar. That bolt was then attached...
THANKS TO ALL THAT TRIED TO ASSIST! IT WAS A FAULTY 10A FUSE. LOOKED FINE BUT WAS BAD!! AGAIN, THANKS:bowdown::yes:
Sounds like a plan!!!:thumbup:
Been there done that...I have double checked all connectors and cords. They work everywhere else!
I'm plugging in my iPhone and have many, many times!
I checked with both the key on and off. The receptacle in the trunk is always hot...at least it was! I'll get the meter and check out the fuses again. The manual tells of a fuse that is not in...
The plug in in the trunk was factory installed. The one on the dash was dealer installed but both are dead!
All of a sudden, both of my 12v accessory plugins, in the trunk and on the dash are dead. I have checked the fuse panel in the frunk and the one under the seat. No dead fuses in either. Any ideas?...
I didn't know they were separate pieces. I just glanced at it and it looked like it was a one piece that goes to both sides. thanks!
Yeah, I know that they aren't highway pegs. I have the ones Lamonster sells on it. I just came off a 4500 mile trip, and while cheaning up the spyder, I noticed the left one missing...have no idea...
Has anyone had the black air/water deflecter in the lower area by their feet break off? If so, do you have any idea what that part is called and possible cost?
I'm in the Beaumont, TX, area and I'm interested in the laser allignment. Please post if one is set up!
The clamp that is shown in the picture from Amazon, is hidden in the top of the housing. All you see after it is installed in the rubber covered strap that goes around the big bar of the SE5.
I got the ATV ram mount from amazon. It works great! http://www.amazon.com/Mounts-Coated-3-15in-Diameter-RAM-B-231Z-2/dp/B007AM1PXW/ref=sr_1_23?ie=UTF8&qid=1377357677&sr=8-23&keywords=atv+ram+mount
I have a pair of Cardo Scala Rider G4's to sell. They are about a year old. We are planning to replace our helmets and will be buying ones with bluetooth. These work great. Absolutely nothing...
Also, my Nomad has LED lighting allowing to wire it up directly without the special harness from BRP. Just use a 5 to 4 adapter.
Sent from my XT907 using Tapatalk 2
I bought the Nomad from USA Trailers on the Home page. Pulls great and is roomy1 Love it!.
I'm planning on coming from East Texas! :yes: Love the Hill Country!
I'm looking for a business in or near the Houston area that does custom Spyder Graphics.
I have found that Bike Spirits Cleaner and Polish works great on all surfaces.
I'm a big guy, too. I run 20/30. Matter of fact, the dealersip shop returned it to me at those pressures.
Just wanted to thank you guys for a great time!:2thumbs: This was mine and Candice's first time. Will be there next time! Oh, several people want to know where we got the Hairy Caps...called Flair...
Well, at least I know what doesn't work!
Thanks!
For those of you with a BRP hitch, does the mud flap do an adequate job in spareing your trailer of excessive tire spray or in there a need for one between the hitch and the bike?
THANKS EVERYONE FOR YOUR ASSISTANCE!!! I GOT THE INFO I NEEDED TO CONTACT THE REP. THAT'S WHY I LOVE THIS SITE!!!:yes:
Thanks! I get a feeling this is your getting me back for "fixing" my frunk at Vendor Village!
Sent from my XT907 using Tapatalk 2
WOW!:yes: Thanks Bob!:bowdown:
Sure! if that will get me the info! Who's Natasha?