I use the x screen as well. I like it. No matter what position I put the Madstad in it would create a turbulence around my helmet. The stock screen was ok but I just wanted more protection from the...
Type: Posts; User: cyclerider
I use the x screen as well. I like it. No matter what position I put the Madstad in it would create a turbulence around my helmet. The stock screen was ok but I just wanted more protection from the...
Thank you for those pictures! You definitely have those rubber nuts tightened more than I do. I can tell by more threads showing than what I have. I bought and installed lock nuts and nylon washers...
Thanks for the information! I did have an issue with the brackets being bent in the wrong direction which prevented me from mounting the shield. So they sent me new brackets and assured I had...
I have a 2016 F3 T and recently installed a Madstad windshield and bracket. At 70 mph the shield shakes and flaps violently as if it is going to fly apart and come off. The dash, handlebars and...
Does anyone know if the F4 shield bolts right up to the madstad bracket without modification?
Bob,
Will these ISCI boards work with the SM5? It seems to be difficult to find foot boards to work with the manual trans. Unless I am not looking hard enough....
I have looked at the Rivco boards, but they don't appear to be designed for the SM5, only the semi auto RT. Check me on that, though.
Does anyone have any suggestions on what manufacturer can provide foot pegs for my 2013 RTS SM5? I would like to lower the pegs. Or maybe attach floorboards and add highway pegs. But if I choose...
.
I purchased my RT brand new last year no miles. I have done very similar mods on mine. I cut a large rectangle hole in the same area you had the dealer cut those 8 holes. I removed the bottom...
Like others have said, karma will retaliate. The Spyder is not trying to be anything but what it is. Like the slogan says. Riding reinvented! I hope your insurance covers the damage. :thumbup:
I believe I will get the Pittbull pipes and wrap them. Thanks for the info! :bowdown:
The ceramic coating is for heat reduction! I would like the ceramic coating to reduce the heat. I do not want to wrap the bypass pipe. Does anyone make a ceramic coated bypass pipe, or do I need to...
I checked out Pittbull and Lamonster website. I did not see a bypass pipe on Lamonster's at all. Unless I missed it. Pittbull has it but no ceramic coated ones. Is this a special request to order the...
:thumbup: I will consider this set up. Thanks!:clap:
What air wing product will work with the 2013 recall scoops?
Has anyone ordered the ceramic coated bypass pipe from Spyder 1 Attitude? It looks like a nice bypass pipe! Would just like to get anyones opinion on the ordering and quality of this pipe....
I know you will be pleased with the F4 windshield! Excellent customer service!:yes: (Thanks Alicia) It is a quality shield that is easier to clean than any other shield out there. Check them out....
I plan on removing the fuel vapor canister in the near future. I have seen the canisterectomy video. After examining the recall procedure I see the "pre filter" has a hose exiting to the atmosphere...
Thanks to everyone for the advice, support and input! I believe I may have seen a YouTube video of the canister removal. I will be going to a different dealer to make sure everything was done...
Nothing personal. I appreciate any advice I can get. But what about situations like stopping in any parking lot and someone decides to flick a cigarette butt under the Spyder, while the bike is...
Thanks for the input. But this is not exactly my first rodeo! I have owned many bikes over many years, and have NEVER experienced fuel vapor like this. Other than maybe riding a friends Buell. But it...
.
I have spoken with BRP and this is probably what they are going to tell me. Go to another dealer. This will be the last dealer visit for this boiling fuel issue. I am going to speak with the...
I am not seeing the condensate like I was before the work was done. I am in the process of (waiting for a call back from BRP) having it sorted out with BRP. Thanks!
I do realize that cool fuel will bring the temp. Down. BUT! If I am spending this much of my hard earned money. I should never have to do that.
I am still seeing the fuel vapor pour profusely out of the charcoal canister!!!!
. I am thinking maybe the dealer did not properly re do the fuel system. When I talked to BRP they specifically told me that heat shields and pipe wrap is not an approved BRP solution. Although I...
.
I don't have much confidence in the dealer I took it to. So I will call BRP and then set up an appointment with a different dealer. Thanks!
After a second visit to the dealer, (where they kept the bike for more than 2 weeks twice) and a "software update" boiling fuel is still a major problem.:banghead: I have a 2013 RTS purchased new...
Sorry. I wanted to say ceramic coating. I meant wrapping the "header" pipes, not the bypass pipe. Thanks. Not taking panels off should make it go faster.
Here is my take. I am happy you found the issue. Some may say that I am a little off the hinges. I have 2013 RTS Spyder with no suspension mods. I am not spending several hundred dollars on any...