Not just that, but whether or not your insurance company would pay up for injuries with a non-dot helmet...
Type: Posts; User: Jetfixer
Not just that, but whether or not your insurance company would pay up for injuries with a non-dot helmet...
You will find with most aftermarket electrical items that the wire colors do not match the factory wiring. It seems that the only common color they all use is black for ground! As it should be.
The safest thing to do would be to remove the frunk. It's not really that involved. There are 4 bolts on top, and 2 on the underside that need to be removed. If I remember correctly on your year,...
He bought the HD...
Not all that cryptic. Use the chart for pounds and psi. Example: If the driver is 200 lbs., and the passenger and cargo weigh 200 pounds, inflate the rear airbag to 70 psi. Here in the USA, we...
I have a 2020 RTL that only made the whining noise after it was pointed out to me! After that, I could not unhear it. I replaced the front pulley with the white one, and have been noise free ever...
I used the Noco NLP20. it is much smaller than a stock battery physically. You must use the supplied spacers to raise it up for the Spyder clamp to hold it in place. Also, be very careful to put one...
If you follow the "bedding-in" process correctly, the EBC HH pads are an amazing improvement over stock.
You're a long way from Sanford, but call Dave Raihl at Seminole Powersports. He's the #1 selling Spyder salesman. He will make you a much better deal on a 23...
I've had quite a bit of experience with these cheap Chinese batteries. BRP switched to these from Yuasa batteries during the covid years. Unfortunately, you will not get more than 6 months out of one...
If you've added power ports for heated clothing, you can backfeed the battery charger through them if they're wired (and fused) direct to the battery.
They're in stock at Seminole Powersports in Sanford, Florida. The two on the floor (red & blue) were both sold already, but they had a truckload more...
You can look here, but you must be a registered dealer/broker to buy directly. However, you can get in touch one of the dealer/brokers that buy from this site and then buy what you want from them......
I liked the new controls. The high beam switch is now where the former flash-to-pass/BRP Connect switch was. The big reverse button is gone, replaced by a more easily operated, smaller button....
I saw 2 in FL Friday sold and awaiting pickup. They had a truckload more.
206795
Saw a couple of new 2024 RT's Friday. Both were already sold and awaiting pick up. I saw two things I don't care for on them though. If you look closely at the top of the side bags, you'll see a...
I agree with all the above advice, especially the relax part. If you are at all tense on the handlebars, everything your body does will be translated into the Spyder. In addition, if you feel that...
The kit from BRP to add trailer hitch comes with the square plug.
From the Operator's Manual page 40...
206549
After hitting the lowest volume setting, to go volume down again should turn the audio system off.
Welcome! Great choice. Like everyone else said, just ask, or search this site.
I, too, suspect the reverse actuator will clear this issue...
I humbly refer back to this sticky post from BRP about proper oil amounts for the 1330 engine. 5.0 qts is the preferred amount for engine oil & filter change only. Additional for HCM change.
...
First off, you absolutely need that tool to safely pop the caps off without damaging the switch underneath. Those switches are made by Carling, and the switch model is the Contura. You can get...
From the 2013 Service Manual...
206448 206449
Absolutely get another opinion. AND ask for the printed BUDS report.
BUDS and BUDS2 are very different software. I've found that using BUDS2 on older models (2008-2016) can cause the software to either not function at all, or act very strange. BUDS original won't work...
Snowbelt's response is correct. However I would like to point out that you mention BUDS2. You should be using BUDS, the original version on your bike. BUDS2 is only for model year 2017 and newer.
I don't know about anyone else, but when I'm done with mine, I don't want it back!!
206214
Thank you for the information, and I totally agree that we should all be on the same page. Unfortunately, BRP does not seem to agree. Every online parts fiche I can find does NOT show the front...