Search:

Type: Posts; User: Sarge707

Page 1 of 17 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    15
    Views
    975

    Have been checking in daily for many years. FB...

    Have been checking in daily for many years. FB groups are Not nearly as beneficial! Help if I can.
  2. 1330cc: My 2015 F3 has 25,000 miles and I did the brake...

    My 2015 F3 has 25,000 miles and I did the brake flush and clutch flush, BUT the coolant was clear and still brought All five balls up to the top, so I said coolant next summer.
  3. I dodged a Big bullet! It appears the original...

    I dodged a Big bullet! It appears the original bleeder assembly is 2 part. For less than $20 I can get the two part bleeder assembly which probably contains the original dark colored bleeder pictured...
  4. Thanks! Its time to back it in the corner and...

    Thanks! Its time to back it in the corner and take the left fender off and access all the ways I have seen on YouTube. It can sit a while Thanks to my Ryker and once its out I'm going to do a good ...
  5. Well I did the left front and the speed bleeder...

    Well I did the left front and the speed bleeder (Non SS) broke off?? Why do I always learn the hard way. I put the wheels back on and made sure not to touch the ignition. What now. I can reach the...
  6. Replies
    50
    Views
    3,499

    https://www.amazon.com/gp/product/B082D8VGMQ/ref=p...

    https://www.amazon.com/gp/product/B082D8VGMQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1
    I use these sleeping ones because being half the driver size they go farther in my ear and block most of...
  7. I remember when this sprocket stuff started 3-4...

    I remember when this sprocket stuff started 3-4 years ago there was a bulletin to lower my 2015 F3 and others(?) to about the 140-160 range. It was thought excess tension helped cause sprocket...
  8. I have both and its about the same yearly...

    I have both and its about the same yearly maintenance. I'm 74 and can't bring myself to just own one!
  9. I had the brake free but sold it? Worked OK but I...

    I had the brake free but sold it? Worked OK but I got tired of the turning on and the whole procedure. I use the 3 blink brake light on the Ryker.
  10. My thinking was if you don,t give it any throttle...

    My thinking was if you don,t give it any throttle the computer thinks its standing still? Couple years ago I adjusted it and gave it a little throttle and it threw the code-which cleared. Mine has...
  11. Just wanted to add a couple things. Yesterday I...

    Just wanted to add a couple things. Yesterday I lowered my tension again to about 125 in the air after running bike to adjust. This equaled 140-145 on the ground. Roughly 20 pound difference with...
  12. Replies
    51
    Views
    2,538

    I have the Blue Ridge which provides excellent...

    I have the Blue Ridge which provides excellent wide coverage and top it off with the MRA touring screen on top set at about 80 degrees.
    At 6 feet easily see a couple inches over the top but feel...
  13. Is it mandatory to have the hose submersed in the...

    Is it mandatory to have the hose submersed in the catch bottle when you have the one way speeder valve?
  14. https://www.youtube.com/watch?v=8mttu3si0u4...

    https://www.youtube.com/watch?v=8mttu3si0u4
    Thanks- I get it now. This guy does a pretty good job. So I could take the Left off bleed-then put it back on and take right off and bleed - then put it...
  15. Maybe its so simple I can,t see. So the speed...

    Maybe its so simple I can,t see. So the speed bleeder screws in permanently and there is another nut on the top you loosen 1/4 to 1/2 turn before you pump the brakes 4-5 times-then you tighten the...
  16. Speed Bleeding 2015 F3- How to do without buds!

    Now that my sprocket is done and belt fine at 150 Krikit I need to bleed brakes-One Man Job- 25,000 Miles.
    Is there a good video? I understand you install the speed bleeders but actual video's are...
  17. I did mine today 2015 F3 after they did the...

    I did mine today 2015 F3 after they did the sprocket. I adjusted it to 140 in the air and its 160 on the ground. Thats with the krikic which you should purchase.
  18. This week I got my sprocket done and before at...

    This week I got my sprocket done and before at 140 pd cricket I had No vibration until 75+ NOW after the adjustment I,m at 180 Cric and getting that annoying vibration I never had at 65-67 mph. I...
  19. I am getting it done on 2015 F3 Thursday at...

    I am getting it done on 2015 F3 Thursday at 25,000 miles and do to lowering my tension to 145 Cricket 3 years ago I am still OK but told my dealer I will pick it up the day after so it cures at...
  20. Replies
    42
    Views
    1,500

    I Better not say my view of evs! Drill baby...

    I Better not say my view of evs! Drill baby drill is floating out there somewhere?
  21. Thanks! I found this quick video -how to remove...

    Thanks! I found this quick video -how to remove so I will check it out.
    .https://www.youtube.com/watch?v=q50emeu3SGM
  22. Did you have to take the wheel off to tell if its...

    Did you have to take the wheel off to tell if its OK. Happened on my First Ryker 3 years ago- Now I gotta check the new one?
  23. When connected your locking trunk will only open...

    When connected your locking trunk will only open when the Ryker is running and locked when engine is off.
  24. Replies
    35
    Views
    1,719

    In CT I use an average of 165 gallons of oil (Hot...

    In CT I use an average of 165 gallons of oil (Hot Forced Air) a season but my house is only 780 sf but my garage is full.
  25. It should have had a brace under the seat recall...

    It should have had a brace under the seat recall an if its Manual transmission you need to be Popeye or have your dealer install the vacuum assist on the clutch which was a kit they could buy. I have...
  26. The recall says about 50 bolts broke while the...

    The recall says about 50 bolts broke while the techs were installing as part of the assembly and 2 while people were driving with a sprained ankle or something? I waited out the hot spell and my...
  27. The replacemment bolt is 95mm so it doesn't...

    The replacemment bolt is 95mm so it doesn't pancake the bottom threads if they over torque it. Sometimes the 100mm would catch shavings on the bottom so they are told to clean the hole.
  28. I had a problem with it opening the other day but...

    I had a problem with it opening the other day but when I got off the bike and pressed from a different angle it worked fine. You can disconnect as said above!!
  29. Got my letter- Have had the sprocket and bolt for...

    Got my letter- Have had the sprocket and bolt for 3 years since this started and still fine at 23,000 miles .
  30. Replies
    11
    Views
    895

    I go from a F3 one day to the Ryker the next and...

    I go from a F3 one day to the Ryker the next and you really have to muscle the Ryker through turns that take virtually no effort with the F3 . The DPS can feel over sensitive compared to the Ryker.
Results 1 to 30 of 500
Page 1 of 17 1 2 3 4