Search:

The Delrin sway bar bushings are self lubricating. You never need to put anything on them. They do not wear or wear out (unless you lubricate them and attract dirt which then acts as sandpaper). If...

We carry the PedalBox brand. We don't yet have a number of items we carry listed on the website. We decided to populate it ourselves and it's taking longer than we'd hoped. Everything does these days!

Agreed... Hate bashing dealerships. Unfortunately, many have earned it, and the good ones suffer for it.

Very unusual for an engine with those miles. Something is definitely up. BoatFixx gives good advice. Do that and you should be on your way to an answer. I'm betting cylinder issues as bad valves are...

Could be an out of round tire. Quite common with the OEM Kenda's. You cannot balance an out of round tire. Easy to check. Simply lift the wheel off the ground and spin it to see. You can also look...

Not exactly. This mod actually gives you what you're asking for. Not more. You get all you are asking for as soon as you ask for it.

A cable throttle (like the 998 had) is a 1 to 1 ratio. You give...

You are not going to have any issues unless there is an inherent problem (weakness) in the sprocket to begin with. Having more power will always bring out a weak link in the drive system. But the...

As long as you're using the proper wire gauge to handle the load, should be no problem with jumping from one to the other.

I don't like them. But it's like nearly everything else. It just depends on the person.

The computer makes any power reduction compensation for lower octane seamless. You're never going to feel it. At higher altitudes, higher octane is counter productive. The difference is going to be...

I don't know of anything around or near the driveshaft that would do this. It may well be RPM related. But since you originally thought it was the front wheel, I'd say the sound is moving around or...

This is what I am thinking as well. The air scoops on both sides tend to be loose and can rattle/buzz.

Really? What tire pressure are you running? And why wouldn't the sound be coming from both wheels if that is the cause?

Did the same thing in the fast lane (with no shoulder) of a 4 lane freeway during rush hour (which is pretty much all 24) in LA. Managed to get all the way to the shoulder on the right hand side...

The Ryker is typically easy on brake components. so it is unlikely that you need rotors. Throwing parts at weird sounds can be time consuming, expensive, and a waste of time and money. How many miles...

BajaRon Spyders/Rykers in the Smokies Event Accommodations.

I should have posted this sooner. But they say, 'Better Late than Never'.

207906

We have Great Customers here at the BajaRon shop. We've met many SpyderLovers here. We love it when they take time to stop in and say hello. Today we got to meet JohnRuckus as he had us do some work...

Get's my vote...

Everyone should run what they think is best.

My grandfather ran aircraft tires with no air at all on his rock desert buggy. Since they were designed to carry so much more weight, they didn't need...

I agree with Snoking1127. Leaning can be good...

Most likely you'll need to have the injectors cleaned. You don't say how many miles are on the Spyder. But typically, it's not the spark plugs. Hopefully, they check it out fully before putting it...

I apologize for not reading all the posts. So, this may be redundant. But a trickle charger (maintainer) will not bring a low charged battery back to full charge. They are designed to maintain a...

Losing weight at a rest stop depends on whether or not they have vending machines! I think they should allow street vendors at rest stops.

People said the same thing in 2008...

You can tell them it is for a Smart Car as we have a customer running front wheels from a Spyder on his Smart Car.

Yes, that is probably the major contributor. You want to clean and apply a very thin coat of anti-seize lubricant on any sliding contact point. We prefer this product. But any decent anti-seize will...

Most replace their brake pads too soon. Some wait too long. The service limit is 1mm. About the width of a credit card. I don't necessarily recommend going to the 1mm limit unless you can see pads on...

The filter has Oetiker clamps but that is not really a problem. I recommend the OEM or good aftermarket like Wix, Napa, filter because the Spyder uses a higher pressure system. We've had customers...

Just remove the vacuum lines and take them to Napa. That way you don't have to guess to get matching size.

If you're going to go to the trouble of draining the fuel, you should also put a new fuel filter on to eliminate the chance of a clogged filter. Cheap insurance.