It will but it is very tight if you try to put it fully under the tire before you start to lift. Works great on the front.
Type: Posts; User: EdMat
It will but it is very tight if you try to put it fully under the tire before you start to lift. Works great on the front.
You might also have a look at the operator guide if you don't have a copy.
https://www.operatorsguides.brp.com/public/tmp/617790EN.pdf
Very smart move. :2thumbs:
When you get it hooked up correctly you are going to notice a tremendous improvement in ride quality. Based on the pic your air bag is completely collapsed.
Maybe the folks with 2024's just need to forget about it till maybe June, or later, so that a few more bugs get worked out and nothing is downloaded with it that messes up the rest of the system.
...
I added mine before Lamonster or Baja Ron decided to add them to their lineup. Loving it so far. The only minor downside I have found was during a freezing weather spell when I had not ridden for a...
That is one of the most useful farkles of the bunch. Well worth the price.
Is the noise continuous as you slow down? Or does it just chirp for a second or so? If you barely let off the throttle and continue slowly letting off do you still get the sound?
If it's a...
John, stop it. When you post stuff like this it makes me think I'm getting old. :lecturef_smilie: ;)
Do something like NorwegianRT did for his RT except for the seat. https://www.spyderlovers.com/forums/showthread.php?158782-Finally-I-fixed-the-Seat-release-on-my-RT!-Video&highlight=norwegian
Found out tonight I have to attend a graduation on the 16th so I said heck with the camper and just made motel reservations for the 17th and 18th. They opened another small block of rooms if anyone...
What you will find is a whole lot of friendly Spyder riders, setting around BS'ing, out on one of many rides (alone or in groups), eating or in the vendor area getting the latest farkles, etc. Join...
Any suggestions for campgrounds close by? Will be pulling my Time Out camper. thanks
Hi and lo beam are the same bulb. Low beam is activated by a shutter, hi beam raises the shutter.
I remember reading about it happening. Seems to be extremely sporadic without a cause being found. You may never see it again.
We have been getting light pollen mist for a while now but the rain keeps it beat down. Give it a few weeks and you will be able to see the tire tracks in the yellow/green streets.
I think that crew works round here. :roflblack:
The K&N filter indexes with the top cover in one position only and it's not easy to find. Gues they were trying to be clever when there was no need. I hate the design.
:welcome: Hope you have miles of smiles!
You could do the same thing for the frunk except bring it in the other side. Routed mine so it's under the seat.
Great job. I like the placement.
I have a feeling that BRP is going to be doing several parts shipments before this situation is resolved.
The XT2 is the latest version. I have had the 590, the XT and multiple car units over the years. XT2 is defiantly on top.
BTW, Lamonster has it on sale right now for $100 off.
The ones that they stock do not fit according to several posts on here.
Are you completely off the throttle when you downshift?
Is it possible that you are blipping the throttle when downshifting? Doing so confuses the bike. It does not know if you are downshifting to accelerate or slow down.
Let off the throttle,...
Are you sure this is not vibration coming from the belt?
If you have the place and the desire, then for less than the $432 you could get 2 ramps and an oil drain pan from Harbor Freight or Walmart, several filter and 'o' ring kits from Baja Ron, oil, and...
I would order the replacement to have on hand and just keep check on the one on the Spyder. I just have made a habit of once a week reaching under and lifting the roller and spinning it to check...
I don't think the epoxy trick by itself would hold up as that is a structural part keeping the engine in place so it's always loaded. Not sure if it could be welded back or not but that might be a...