Search:

Type: Posts; User: PW2013STL

Page 1 of 17 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    5
    Views
    175

    HowTo: Hi Pete, If you want to ride over I can help...

    Hi Pete,

    If you want to ride over I can help you with this.

    Les
  2. Replies
    29
    Views
    2,230

    LOL:roflblack:

    LOL:roflblack:
  3. Replies
    7
    Views
    168

    Had Knott Grills on our RT and they work well....

    Had Knott Grills on our RT and they work well. The problem with the F3 is that the air flow is through the back of the fans and you cannot see the build up unless you take the front end apart. Also...
  4. Replies
    7
    Views
    168

    The filter media is fiberglass so no issue with...

    The filter media is fiberglass so no issue with rain.
  5. Replies
    12
    Views
    294

    Not sure what year BRP changed the power steering...

    Not sure what year BRP changed the power steering set-up, but my wife's 2018 steers much easer than my 2015.
  6. Replies
    7
    Views
    168

    2018 F3L Radiators at 10,086 Miles

    With the success of adding a filter in front of my 2015 F3s radiators I decided to do the same on my wife's 2018 F3L. I was surprised at the amount of gunk build up at only 10,086 miles.
    You can see...
  7. Replies
    8
    Views
    217

    Most of them are T25 on the F3. There are a few...

    Most of them are T25 on the F3. There are a few T30's though.
  8. Replies
    9
    Views
    257

    Not an issue. The rain does't hurt the filter and...

    Not an issue. The rain does't hurt the filter and passes right through. The rest is the same as stock.
  9. Replies
    9
    Views
    257

    I used aluminum angle for support and aluminum...

    I used aluminum angle for support and aluminum sheet that I enlarged the existing holes to 1/2".

    I plan on doing this to my wife's 2018 F3L, but instead of the sheet I will string 19ga ss wire...
  10. Sorry no video, but after opining the frunk...

    Sorry no video, but after opining the frunk remove the black plastic cover up by the headlights. Pull up from the bottom, and then remove the 4 plastic pop rivets holding down the frunk bucket and...
  11. I noticed that on my wife's 2018 F3 that the...

    I noticed that on my wife's 2018 F3 that the polity on the GPS changed from my 2015. I assume that they did the same on the trailer power wiring. The hitch from our 2014 RT fit the 2018 F3 limited. I...
  12. Replies
    9
    Views
    257

    Menards carries the same, and the blue filter is...

    Menards carries the same, and the blue filter is made from that. Price wise it works out the same.
  13. Replies
    9
    Views
    257

    https://www.spyderlovers.com/forums/newreply.php?d...

    https://www.spyderlovers.com/forums/newreply.php?do=newreply&p=1467432

    I wanted something that would catch the bug body parts that the screen would let through. My radiators were packed with that.
  14. Replies
    9
    Views
    257

    F3 Grill Filter

    After spending 5 hours cleaning the gunk out of both radiators I added a screen and filter behind the grill. I was concerned that would create an air flow issue resulting in overheating. I chose thin...
  15. Replies
    18
    Views
    782

    I believe that the stock RT bars will fit an ST....

    I believe that the stock RT bars will fit an ST. If so then the Tri-Axis will also. Do a search on RT to ST bars to be sure.
  16. Replies
    9
    Views
    185

    Welcome and Congrats! I also hope to meet you....

    Welcome and Congrats!

    I also hope to meet you. What color is your F3?
  17. Replies
    1
    Views
    53

    You guys have fun!!

    You guys have fun!!
  18. Replies
    4
    Views
    194

    Not possible as the handle bar set up are totally...

    Not possible as the handle bar set up are totally different.
  19. Replies
    30
    Views
    842

    Thank you for sharing your story:ohyea: To...

    Thank you for sharing your story:ohyea:
    To :cheers: many many miles of smiles:2thumbs:
  20. Replies
    18
    Views
    359

    The two times I have done the races I used a...

    The two times I have done the races I used a blind hole puller with a 5 pound slide hammer. This worked great!
  21. Replies
    6
    Views
    273

    A great deal on great windshields! We love both...

    A great deal on great windshields! We love both of ours!!
  22. Replies
    18
    Views
    359

    Here you go. ...

    Here you go.

    https://www.spyderlovers.com/forums/showthread.php?90853-Heads-Up-for-RT622-owners
  23. Replies
    5
    Views
    383

    Not for belt replacment.

    Not for belt replacment.
  24. Replies
    3
    Views
    255

    I would get the tensioner from Lamonster Garage....

    I would get the tensioner from Lamonster Garage. He did a great job on the pulley design. Before he did this I modified the stock pulley to a two bearing setup. I like that Lamont went with a larger...
  25. Replies
    7
    Views
    414

    That's what I liked about the RT! Front forward...

    That's what I liked about the RT! Front forward radiators that were easy to see if they needed cleaning and the aftermarket screens to help keep them clean.
  26. Replies
    24
    Views
    1,240

    I believe that is from the OEM bars. It covered...

    I believe that is from the OEM bars. It covered the place where the GPS mount goes. Most likely fell out when the Tri Axis bars were installed.
  27. Replies
    7
    Views
    414

    1st ride with intake mod

    Just got back from over 200 miles in 87 temps and did low/ high speed on two lane and 4 lane as well as city streets.

    Temp never got past mid way(4 bars) and the fans only came on once when I...
  28. Replies
    7
    Views
    414

    Good idea, but most of the packed area was behind...

    Good idea, but most of the packed area was behind the fans, and the fans are hard to remove through the grill opening.
  29. Replies
    7
    Views
    414

    Hi Peter, I share your concerns, and that's...

    Hi Peter,

    I share your concerns, and that's why I will be watching this very carefully. In the last month I had two overheating events due to the build up. The screen would flash a warning and the...
  30. Replies
    7
    Views
    414

    Fixing the Crud Build Up on My F3

    After spending 5 hours cleaning the crud out of my radiators I wanted to find a way to prevent it that would be easy to service.

    I put in aluminum angle as support and then aluminum sheet with...
Results 1 to 30 of 500
Page 1 of 17 1 2 3 4