Search:

SportsterDoc, just letting you know that you got your brake fluid numbers mixed up.

If you ever get up to Buffalo, I have the stock seat off my 2011 RT (7,000 miles on the seat).

Cats like to be higher up than the surrounding area to look for food or approaching danger. Maybe build them a better perch than your spyders or put tarps on the sides so they can not look around as...

I have had good luck with hammering in a slightly bigger torx bit in a stripped out fastener head. The hammering seems to help shock it loose. Your results may very. I take no responsibility if the...

Deflectors Sold

Fit all Spyder RT models 2019 and prior. Excellent condition, $80.00 plus shipping.

Had it on my 2011 RT,not sure of manufacturer, fit perfect but too loud when used with my aftermarket muffler. Comes with two usable gaskets and two aftermarket exhaust springs. $120.00 plus shipping.

I think Merlot has the best method at this time (nut would also work ). A Tig welder would be ideal, just make sure to unhook battery and ground the welder to the handlebars.

I would line up marks, tap it on, over tighten bolt and call it done. The splines do not look that bad unless they are gone on the other side of the shaft. If need be go one size bigger on the bolt...

Oldtimer51, how did it go with BRP? How many oil duct screws got tossed or inadvertently wiped off the drain plug and never seen or still stuck in the motor somewhere? Makes you wonder.

A couple more years and another 5,000 mi. no problems yet from the missing screw ( it does not get babied).

Chuck

PM sent.

Would this also fit RT models and who is the manufacture?

Nice work!

My 2011 had the same problem. Tires looked liked new(Kendas). Had them balanced twice, problem persisted. Switched tires and wheels side to side(reversed rotation) problem gone. Put new car tires on...

I use ethanol free in all my small engines, bikes, snowmobiles, and my 1972 Olds with no other additive for winter and summer storage. My friend does the same, never any problems associated with gas....

My 2011 RT was doing the shake at 45 mph. After balancing little improvement, swapped tires and wheels from one side to the other and shake was gone. Stock Kendas looked like new and were wearing...

Seems like your clutch master cylinder needs a good flushing or taken apart and cleaned and if that is gunked up the slave cylinder will need attention too. Low mileage, age, and lack of use can...

I have a couple of two wheel bikes I ride when I am by myself. The RT get used when the wife and I go on overnight or local day rides. I plan on keeping the RT for the long run so if any thing...

My dealer did not give me the option to have BRP warranty the job and that was 4 years ago. I will roll the dice! Last I checked it did not look like oil was pushing through in that area.

Found mine on the magnet 10,000 miles ago, still working fine.(also a 2011 RT) Did not see the need to tear it down for just for that plug. Do you feel lucky?

Look like a nice quality product! Fresh stock made this year, run quiet, smooth, stick to the road nice and very little weight to balance. Will have to wait till I get caught in the rain to see how...

Yes the key needs to be next to ignition switch to start. Once started the key with the chip can be moved away.

Tire Rack has them with no tax and free shipping! They are on the way! Thanks!

BLUEKNIGHT911 what model tire were you looking at? I value your opinion and you do a lot of research on tires. My Kendas are wearing fine but have a 45 mph shake that can not be balanced out. I...

I have a 2004 Bombardier Outlander 400 H.O. XT 4x4 with plow and 4'x8' tilt deck trailer all in excellent condition. I am just south of Buffalo N.Y. If interested p.m. for details.

Anybody in the Buffalo N.Y. area in need of new rear tire(ECSTA AST date code 2314)? Plans have changed not going to use anytime soon. Prefer not to ship $75.00

25850

New, unused but opened to verify everything is there and undamaged.Changed my mind about installation....

Excellent! but what is its purpose? and is it nesscesary to re install? I am all for proper repair if it is worth the work involed.

Chuck