Shawn Smoak said in his vlog today, 03-06-24, that Apple Car Play will be available the middle of this month.
Type: Posts; User: Iceman47
Shawn Smoak said in his vlog today, 03-06-24, that Apple Car Play will be available the middle of this month.
I also talked to the gentleman at Wick-it Performance before having my ECM flashed. The clutch engagement point was not brought up, nor the need for increased oil change intervals. I couldn't decide...
17 to 19 inches would be for the pre '20 Spyders. The 7.5" measurement sounds about right. I have my old one, but I'm not able to measure it at this time. There is a thread on this site concerning...
Requested both the t.s. and shift pad from Dave. I received them in a couple days and installed them. What a difference! Especially the turn signal button. You can be assured the signals are...
Don't know about the older Spyders, but the switches on the newer ones (I have a '20) are made by Carling.
According to Shawn Smoak, in his YouTube posts, if the dealer is using the proper and required Loctite number there is no need for it to set up. The unit should be rideable immediately.
Sure wish someone had a replacement gas strut for the '20 RTL trunk. Replaced the seat strut with a stronger one from McMaster-Carr, but have been unable to find a replacement for the trunk. Mine is...
If you're going to insulate the wall and ceiling, leave the vents open to allow ventilation of the space between the ceiling and the roof. Especially important here in the Midwest and the temp and...
Don't know what I'm doing wrong. My 2020 RTL always gets 32 to 33 mpg. Much of my riding is on two lane roads at 60 to 65 mph. Interstate driving at 70 to 75 drops the mileage 1 or 2 mpg. It has a...
Had stage 2 done by Wick-it and all I can say is-----what a difference. Normal riding and throttle openings don't seem much different than stock. But get serious and it comes alive and normal...
Check the polarity! Many of these came with the positive and negative reversed. If that's the case, your nav definitely won't work.
I used a clay bar on overspray on my truck. Black on black truck. Couldn't really see it, just feel it and it was light. Don't know how heavy your spots are or if it will work for heavier spots. But...
I've not had a problem with dirt or moisture. The cover fits very snuggly. A dab of dielectric grease should help ward of the occurrence of such.
I installed an isolated fuse block which had leads that connected to the battery to power the block. There were connections for constant power on the aux. block, attached charger pigtail to these and...
If I remember correctly, Shawn Smoak, on his You Tube channel, showed pulling the engine to replace a broken transmission output shaft. The dealership purchased a special tool, lift, cradle, whatever...
After watching the Shawn Smoak video, I checked mine and it didn't lock. As he shows and mentions, the amount of movement needed to correct this is minimal, 1 or 2mm. Barely discernable. I can't...
I just received my strut from McMaster-Carr. I ordered 9416K14, which is exactly the same dimensions and stroke as the original. I also ordered the 6465K26 eyelet which does indeed open the seat...
Thanks for the info K80. My research had resulted in the same number for the strut from McMaster-Carr. But hadn't thought about the eyelet, as I was going to use the one from the factory strut, but...
Thanks to all who replied and suggestions for sources I hadn't thought of. My belt tensioner from Lamonster should arrive in the next couple of days, which will necessitate removing the same panels...
Has anyone replaced the gas strut on their '20 or '21 RTL? Mine barely holds the seat open with nothing on it. I have a Butt Buffer and have to take it off everytime I fuel.
The original strut was...
Not looking for any credit, but I posted pics of the above subject when I installed ROX risers shortly after purchasing my '20 RTL. Just hoped it would help someone else.
I installed the AutoFeel lights Doc McCoy used and it absolutely destroyed reception on the radio. Ordered ferrite core chokes to put on the power wire going to the light to no avail. Tried the other...
As Lamont says in his installation video, "if you're handy, you can make them yourself". So I did. Some aluminum bar stock I had laying around and some metric machine screws and nuts from the...
BigJohn, the antenna simply unscrews. No need to remove any Tupperware. The threaded base is 6mm and goes through a simple ring connector on the antenna wire. After removing the antenna shine a light...
This stuff works!!! Went for a ryde yesterday, temp in the mid 80s, after about an hour, I checked the glovebox and it was cool inside. Might trust putting my phone in there now.
I have a picture of the Spyder before it was completely out of the crate. The rear trunk and bags is one assembly, separated from the frame for shipping, but I can't see if the antenna is installed...
As has been stated in several other posts, the radio reception on my sucks. My 2015 radio was as good as any 4 wheeled vehicle I own. So today I decided to see if I could get my antenna out and clean...
I posted a thread about installing rox risers on my 2020 RTL with a picture showing the zip tie that must be cut. Basically remove the right speaker grill and find the wiring harness where it comes...
Reception on my 2020 RTL isn't near as good as my 2015 was. Don't know if a different antenna would make a difference or not. Am not real happy about it. Guess BRP assumes no one listens to FM...
I used part# 1R-P2PPS10K black anodized, with the stock Spyder clamp on my 2020 RT. That brought them up and back just enough to suit me. For more adjustability an F3 top clamp could be used. I...