I have found that to ride my Can- Am quickly thru the twisties requires climbing around and leaning...alot! Trail breaking becomes very difficult in these conditions. The hand bake will eliminate...
Type: Posts; User: Tweakers
I have found that to ride my Can- Am quickly thru the twisties requires climbing around and leaning...alot! Trail breaking becomes very difficult in these conditions. The hand bake will eliminate...
Scosche Magnetic phone holders. :thumbup:
133320
2 2.1Amp USBs/Volt meter and 12V power on the right.
If it's anything like a car, that sensor is used to calibrate the fuel mixture of the fuel injection. If that's the case, you don't want to do anything with it.
I was having my 2015 RT-S Special aligned at Power Motorsports in Sublimity, Oregon and I asked how they did it. They said Lazer Alignment. I don't know if it's the same as mentioned on other...
Thank you for the info! I'll be taking the back of the bike apart for numerous "additions" and will mess with the arm rests then.
My wife and I got in our first ride together with the Corbin seat and found out that the arm rests prevent her from reaching the heated hand grips:gaah: I think I'm gonna take them off for the...
We rode out to Spirit Mountain Casino and had a Christmas Dinner Buffet that was painfully good. We decided the heated seat was very NICE! Merry Christmas everyone!
Thank you for your insight and the photo flip! Normally my wife (who is a big time quilter) is in charge of color decisions. She was out of town when this decision had to be made and like you...
Got the Corbin Seat installed and Power Yamaha Fixed the Air Ride system as well. Found a bad connection. One side affect is the Headlights were aimed into the ground since the rear is now sitting...
Not sure what happened with the Photo alignment, Don't know how to fix it!!!:gaah:
I only have about 20 miles on it with the Corbin, But so far, very nice, Roast Rump!:yes:
Not to mention my driving!!!:firstplace:
Got it installed!
I'm 5'9" with a 32" inseam and ride with a full face helmet. With the stock windshield all the way up, I am out of the wind and it's a quiet ride IMHO. When it's raining ( in Salem Oregon? !) I...
Finally got the LED headlights installed. I ended up removing the circuit board, had to trim off tabs on the sides of the circuit board holder which then let it move enough sideways to disengage the...
Has anyone removed the "holder" for the circuit board that's mounted in the headlight housing. If I can get this out. I should be able to fish the LED box down below the solenoid....where there...
I don't see how to fit this much "STUFF" into this housing. There must be some differences in a) housing design (the locking ring for the bulb is to big go let the rectangular box to fit past it or...
Does anyone remember the GM Lean Machine? It lived in GM's Pavilion at Epcot for years.
Don't buy a 2013 or newer Ford Fusion!! Gotta pull the whole front nose off to change a headlight...:yikes:
I got on using my lap top (windows 10). Can't get on with my wife's computer ( Vista with IE9) or my Samsung Note 2 smartphone.
Our 9005 LEDs are in the mail!
That's all I get as well. Tried multiple times over the last two days!
What happened to Tricled's website? The new format won't let me see any of their products:dontknow:
Check out an RT-S sometime. It is shorter than the limited but does protect me at 5'9" will when raised and let's the wind clear my shield in the rain when lowered.
Check out JO'S Machine Shop on the home page. Everything you need! :-)
The SE always disengage the clutch between shifts. On my old sports bike I never used the clutch to shift, resulting in incredibly fast shifts.
PLENTY of turns in the Oregon Cascades! :ohyea:
We just picked up Leftover 2015 RT-S SPECIAL for 22900.
Just got back from having the BahaRon Swaybar installed at Power Yamaha with great results. It really is worth it on the 2015 RT-S Special! As a bonus, the dealer told me that the air system on the...