Search:

So, you're saying that you can't easily spin your wheels with the brakes disengaged? You need to re-do the install if this is the case. Not a good idea to wear down a set of pads by having them...

You should run at least 2 (we do 3) increments or phases on the torque process. If you torque one lug nut to full spec with the other 2 loose, that can warp your rotor.

That is unusual. Using the wrong torque procedure could warp the rotors. But this is fairly hard to do. Do you have a runout gauge to check your rotor's with?

Rode my friends Royal Enfield 350 in Kathmandu, Nepal. All 18 hp of it! A modern 1950's motorcycle. 350cc is a BIG motorcycle in Nepal where most are in the 150-185cc range. His was carbureted...

Both of the issues referenced in this link were 998 V-Twins. Not sure this relates meaningfully to the 1330 motors.

What, exactly, did you do on your 'Brake Change'?

May Birthdays are the BEST!!!:thumbup:

208232

It's normal. You're fine...

Have you watched this video?
https://www.youtube.com/watch?v=wRFP2NQXnFE

AWESOME! Looks like you nailed it. There are some other DIY mods that can make the 998 much less issue prone. As far as lighting (or any electronic add-ons), you'll find the Spyder to be very...

We've only seen failure due to improper service installs (usually water pump related). Not to say that they don't fail naturally. Just not sure how concerned we should be about it?!

It's his nature... Probably comes from years of trying to miss Roos!

Some like to reinvent the wheel. But when you realize that the Krikit gauge is much more accurate than needed to start with. Adding accuracy with a high tech approach isn't worth the effort. The...

Yes, 2014-2019 will fit and work very well. 2013 will also fit but they are terrible shocks. Don't bother with them.

We carry the JT Air Filter kit. You can call the shop at 423-609-7588 to order.

We received our order from BRP yesterday afternoon. So, the 1330 HCM filter appears to be available again. Now, if they could just find a way to reduce the price a little bit.

I 2nd Peter's statements.

Every Spyder ever made come from the factory with a belt tensioning system. Otherwise, you would not be able to properly tension the belt drive. However, very few come...

You got that right. No one (that I know of) makes a replacement belt for the Spyder. Aftermarket lives on volume. Just not there with the Spyder. There isn't that many of us and Spyder belts last...

Try eBay. You can do a search and save it and they will notify you whenever a listing meets your stated criteria.

I wouldn't be worried. It's probably due to operator error and not some inherent engine defect. The center cylinder is always going to feel the effects of abuse first.

I'd say that's your problem right there. You don't say how many miles this Spyder has. But the spark plug wires are of very poor quality. If you disturb them at all your Spyder will usually run much...

They know this. They just can't help telling stories. Pair your phone with your helmet radio and you won't have to look at 2 screens much at all. But I assume you already know this. Get past the...

Look at used. There are some awesome deals out there. People have installed all the bells and whistles already. Miles don't hurt the Spyder if it has been taken care of. You get in for less money and...

Very good advice from Snowbelt Spyder. It is very common for the dealership to overlook not only this air-ride connection during prep (which they charge full price for whether they do it right or...

It is not uncommon for manufacturer's to change something just to foil the installation of aftermarket components. BRP is particularly good at this.

Regardless of which one you end up with, you're going to get very loud.

Welcome to the forum!

True... But that's the wrong filter. That is the SE5 HCM filter. And over $100.00 cheaper than the correct filter! (Part # 420211156) Don't try to install Part # 420256454 in your SE6!:yikes:

Funny how we're all so different. I do not like the paddle shifter. Sure, I could get used to it. But it feels artificial and disconnects me from the machine. I can finesse it to approach the feel...

Most of the parts houses are on a drop-ship system. When the supplier runs out, so do they. But I'd be interested if this angle works for someone.

We stock them. Usually have 15-20 on hand. But when BRP ran out, we got cleaned out in a hurry. We've had them on back order more than 2 weeks. If you can find one, I'd get it.