Search:

Be sure your grip on the bars show a slight angle on your elbows. Means you are not overreaching to steer.

I got the 19" from Lamonster. Better than the short stock unit, and at 5'9" can still see over the top while driving. I do not like having to look through it all the time if i do not have to.
Looks...

Looks like melted plastic on the motor. I had the same thing on my exhaust after a ride, after i rode over a plastic bag and did not know it stuck to the exhaust. The plastic smell gave it away.

Any item is only worth what someone is willing to pay for it. If you have an intimate knowledge of the seller and how he keeps his stuff and you feel its worth it, then get it. But, dont just get it...

I have mine off a 2020 if they are the same. If you find out they are the same, shoot me a pm. Mine have 285 miles on them. I should add mine is a Limited.

3M makes a clear coat wax, which is available at stores which sell automotive paint. Leaves the finish scratch and swirl free. But, your finish sounds like it needs a light buffing to eliminate most...

It was posted in one of the BRP rollout videos that it was in production for one year only.

I did speak with Pierre about this as the video shows a spacer block for the break pedal included in the kit, which is no longer there. They redesigned the angle so there was just 3-5mm of spacing...

The dealer i purchased my spyder from in Mass just got 4 of these in stock for sale.

For me, sitting on them was key. I was all set to get the RT until i sat on it, and was not all that comfortable. Sitting on the F3 was totally different for me. I spent two hours at the dealership...

These guys have one in stock; https://www.youtube.com/watch?v=gQ-M41k2k8k

On my 21 F3L the pressure is supposed to be 15lbs in the front, but i did not like the way it handled. I brought it up to 18lbs in the front and it feels good now. The big thing is to have both tires...

Looks like an uncomplicated install with all items pulling off after removal of a few bolts. Not a big deal on this upgrade. With the amount of adjustability, i am surprised the poster above could...

As the title says, looking at both of these seats as an alternative to the custom route. Does anyone have any experience with either of these seats on a F3 or F3L?
thanks
Joe

Out of curiosity, why would manually downshifting increase the probability of this happening. Inquiring minds and all.

Check out "U-Ship" and see what bids you get to do the job.

I basically have the one in the pic, works well. My foot always finds it.

No matter what you do, be sure you sit on it and take it for a ride if possible. I was all set to get the RTL, and did not like the way i sat on the machine. The minute i sat on the F3L, i knew it...

This is what i have. This is also listed for the RT. It will not fit?...

I believe the post is 8 years old, which is why he wanted a 12 or 13 model.:roflblack:

I have the aftermarket one on my 21 F3L and would not be without it. Large enough to do the job, over the tiny thing which comes factory. It was the first thing i replaced before even riding the bike.

Not only that, but the fender area is way lower than what this was designed for, max visibility at height.

I dont know who i trust less, the dealer or BRP. When i got my 21 F3L, i put a tank bra on to stop the marks where you sit. When i took off the rear seat to access taking off the front, the front...

Maybe speak with someone at Imotor. They seem to ship alot of spyders around the country with no problem.

I have the early 21 version. Love the color. Did the fog lights, w/s, fender lights, tank bra, and under hood light.

I would sit on the bike like shown in the F4 product video and measure up to see where the w/s will actually come to on the bike, and your eye level. Then you may have a better idea of what to...

Be sure to read the do's and don'ts above as it will answer alot of questions after your first ride. And by all means, drive like a car, not a bike.
Joe

I got the slingmods fogs for my F3L, no so much for added light as i rarely drive at night, but just more light out front for other people to see me coming. Switch goes in the factory position, and...

And i thought dodging a racoon was hard, LOL

I have been looking at the online manuals on BRP site and it shows the part numbers for the two stage heated grips and switch, as a new install. It looks to me like the grips are designed two stage...