A while ago, I remember coming across mirror block off plates for the F3 and the F3S. I reached out to the maker and asked if they were going to make some for the F3T/L. They said yes, but I...
Type: Posts; User: Nuke
A while ago, I remember coming across mirror block off plates for the F3 and the F3S. I reached out to the maker and asked if they were going to make some for the F3T/L. They said yes, but I...
I'll take that.
What 2dogs said. The ones from LaMonster are the same ones from Electrical Connection. The design of the bulb specifically mimics the position of the filament in a standard halogen bulb. This is...
I bought the Green Manuals one online and downloaded it as a searchable PDF so no USB needed. Be warned though, if you're looking for the 2019 version, it's full of errors. Not the fault of Green...
Can't say enough good things about the Freedom Shield.
So, on a hunch, and confused as to why the USB port in the trunk wasn't on any wiring diagram in the manual, I went down to the bike and took a look for myself. I was surprised to see that the...
No, the fuse is protecting the accessory circuits, the hot is coming in from the left side, meaning the 12V supply is coming in from the left. The portion of the wiring diagram you are looking at...
So here's what I found in the manual. There's three "customer accessory circuits". One is behind the front storage compartment, one is behind the lateral service cover, and the last one (the one...
My wife's mirror cover came off on the highway, no bump. The dealer replaced it under warranty. It's a terrible design how the covers are attached. I really believe that the mirror vibration has a...
I wonder if the LINQ system will be compatible with the 2019 F3 Limted?
Right HERE!!! https://www.spyderlovers.com/forums/showthread.php?116380-F3T-and-F3Limited-mirror-fix!-The-Wedgie! I have an install video on my youtube channel if you'd like to see how easy they are...
I have a Freedom Shield on my Harley and I absolutely love it. The flare on it is optically clear meaning it doesn't distort the road like most other flares do. The plexi is thicker than most and...
Correct... that method does NOT work on the 2019, nor the 2018 (any of the new style dash with BRP Connect). For the 2018, there was supposed to be a selection in BUDS to put the flashers into...
Only a couple things I've noticed so far with my wife's F3L. One major MAJOR complaint is that they moved the turn signals from a nice high place away from other lights (in the turn signals), and...
This is my one major complaint of the new Spyder. I am going to be talking with Lewis at Electrical Connection to see if there is a way to make a relay that will drop out the white light when the...
In a way, 2RT was correct. I replaced the turn signals on my wife's 2019 F3S with LED's and there is no current way to cancel the hyper-flash. In previous BUDS, there was a setting that allowed the...
More than likely it is NOT the cable. It is probably a misalignment of the shaft on the frunk lid. I recently adjusted the one on my wife's F3L because you had to slam it shut. As I made it...
For anyone that is on the fence about getting the wedgie, GET OFF THE FENCE AND GET A SET!!! If you think it's hard to install, YOU'RE WRONG! I made an install video to show how incredibly easy it...
Hey Bill, I haven't done the licence plate light yet, but I DID do the turn signals. I have a youtube video of the installation. If you're interested, I can get the bulb and do an install video for...
Where are you connecting it via USB? If it's in the trunk, it won't work. I think you have to have it plugged in to the USB port in the dash cubby.
I was considering using an extension. They are cheap and I get get a variety of lengths and then put it wherever I want. This could very well be the solution I go for.
A 7x12 trailer alone would exceed his towing limit, forget about putting the spyder on there.
Canadian engineers.
This does not appear to have a flare at the top. Can you confirm this? Also, the 20" measurement, is that from bottom edge to top edge?
If you figure out where to put it where it is accessible and you don't have to drill a hole in the frunk shell, please share.
We were looking into that but we decided on the F3L for a couple major reasons. If you are going to add a trunk anyway, there's absolutely no reason not to immediately upgrade to the L. For one,...
Can you at very least link the FB post? We are interested in a taller windshield but would like to see it.
Surprisingly, the cover came in to the dealer yesterday. They put it on and all is right in the world again... until it falls off.
I suspected this was a common issue. Poor design by BRP to only have them attach from one axis (from the front) and not "click" into place. The compression clips are not enough to hold those mirror...
I tell this to all my friends who get new bikes: let the dealer do the first service. The main reason is that the factory assembly isn't always perfect, and the dealer assembly isn't always perfect....