Thanks for providing me the testing info. I'll have to wait until I can coordinate with a friend who understands how to perform these resistance tests.
Type: Posts; User: vienna7475
Thanks for providing me the testing info. I'll have to wait until I can coordinate with a friend who understands how to perform these resistance tests.
I was at the dealer this morning and told the service manager about my issue and he doesn't have a clue. I told him about the suggestion of disconnecting the battery and touching the leads together...
Trust me. I've gone through all the menus and have made sure that the external speakers are on. I've even been looking at wiring diagrams to check for any cables that might be near the fuel filter as...
If I disconnect the leads to the battery and touch them together my assumption is nothing will happen as there wouldn't be any juice in the system. Or, am I mistaken and their will be some residual...
Yes. The bar moves up and down. Will turn the radio off if I run it all the way down. I confirmed the radio going off by listening through the SM10 and my Cardo headsets. My assumption is the hot...
I have a 2015 RTS SE6. I just finished changing my transmission filter, air filter and oil and was putting everything back together when my hand slipped and knocked one of my horn wires loose. I know...
I have a 2015 RTS SE6 and yesterday I test rode a 2021 RT SE6 and immediately noticed an improved DPS system that provided more assistance taking off if you were turning from a stop. Is this a...
I finally cut the opening the rest of the way out. The engine still runs cooler than it did. We have 92+ degree heat right now so I think you hit a point where you can't see a major change when it is...
i haven't cut out the opening yet. I will post something once I do it.
Here are some pictures of mine installed. I left the factory vent opening in the panels and didn't cut them out to start. That way if I didn't like them I would only have 4 small holes to fill and...
You can get these vents on Amazon for $81.99. Search for this. Can-Am Spyder Rt Vent Kit 219800388 New Oem. I installed them on my 2015 RT and didn't cut the hole out but let them feed the existing...
I have a 2015 RTS with Tri-Axis handlebars. According to a couple of people I've talked to it will fit on them as well. Can you call me at 502-523-9827.
I'm interested. How do you want to setup payment.
Mark, I'm interested as I've been researching this product. What year was yours purchased as I think there have been some changes to the RT kit.
I talked to the owner of Spoiled Biker and he said Starcom1 has been purchased now by a third company. He isn't buying anything new but will give good deals on what he has left. He said the system...
The reason I’m looking for an all in one communications system is because I also ride a Goldwing and want to keep the same helmet headsets from one bike to the next. I understand the sena devices...
I have a 2015 RTS and have been looking for a good all purpose communications system. I came across a system that appears to do it all. It is called Starcom1 Digital. Has anyone used this system on a...
I have a 2015 RTS SE6 and have been looking for a CB alternative to the factory CB. I came across the J&M handlebar mounted CB audio system JMCB-2003k-DU. This looks like it will do nicely at a lot...
Thanks for the quick feedback. I'm looking to install a digital gauge somewhere on my dash. I'll do a google search to find the best place to get a maintenance manual. I have the owners manual.
Does anyone know if the 1330 engine has the ability to hook up an after market oil pressure gauge. This would go on a 2015 RTS. Tried searching the forum but get too many hits with the words oil -...
Please keep us updated after the install. I'm curious if the pull is like that of a standard front brake handle. I was at the Spyder In The Hills rally in TX and someone said it has a hard pull.
As they say. Lessons learned are always expensive and you need to always read everything. I made the mistake of making room reservations at this hotel for the Maggie Valley event and due to the...
You should tell them they need to replace the parts they damaged. There is no way the mechanic has been doing alignments on other customer bikes and none of them have noticed scratches. He may have...
I've been riding motorcycles for 50 years and experienced the same twitching of the spyder in the curves as you. You will find out from reading various blogs that to resolve the biggest part of the...
I've been researching arm rests as well and here is a set that swings out and is adjustable in height. They are longer than other arm rests and are attached to a bracket that bolts on to existing...
Man I sure wish you had decided to do this about 5 weeks ago. I just bought a 2015 RTS SE6 with 2700 miles on it. I have a Goldwing that is pretty much the same color as your spyder. Would have loved...
I've been riding the bike around all day today with the tire pressure lowered back to 22lbs and the noise is pretty much gone. I guess it just took awhile for the belt to adjust itself to the new...
Weather has been cooperating and I was able to add air to the rear tire bringing it back to 30lbs. I've been riding it all around for the past couple of days and the noise has reduced by maybe 50%....
I think the next step I will take and the easiest is to add air to the rear tire to get it back to 30 lbs as it was when I received it and ride several miles to see if the noise goes away since this...
I thought about the brake pads but when coasting down the drive I don't have to be turning and applying the brake doesn't change the sound. If the pads were slightly rubbing the sound should go away...