Search:

I have a 2017 F3. Not sure of the later models... The user accessory wires are not energised until the engine is running...

PM sent...

Sorry my bad .....I new there were two different size bolts.....it's been four years since I did an oil change on my old STs, and I got into the habit of changing one filter at a time so I didn't get...

Check the length of the retaining screws...the screws on the engine filter are longer than the screws on the HCM filter....
If by chance the screws were mixed up ...and if the longer screw or screws...

74 in a few weeks ...been riding two wheels since I was 14..riding Spyder's for the past 9 years...
My dad (god bless his sole) when asked his age would reply " old enough to do it again...but young...

By looking at your photo you seem to be leaning back into the back rest...if it is a BRP back rest it is adjustable forward and back with a allan wrench...by adjusting the back rest forward that will...

Hi glennm
PM sent

Somebody hasn't accidentally engaged "Eco mode" ?

First up...the (SE) is actually a manual transmission that has computer controlled shifting and a computer controlled WET clutch....

Who did the oil change ?....

As all Spyders have a WET...

:agree: " I am to old on the outside, Hey but I am young on the inside." :clap::2thumbs:

My dad used to say...." young enough to do it again....but old enough to know better".....:lecturef_smilie:

I have found DPS would not react unless the Spyder is rolling...eg; with the engine running and the park break off roll the Spyder forward or back (only a little) I find the steering will turn with...

Wet-N-Dry emery / sand paper works well in the bar clamp.....:2thumbs:

I sometimes strap a carrier across the passenger seat via the passenger grab handles on my F3 ... (to carry my dog and other items) this pushes down on the passenger censer on the rear seat...
This...

He...He....Old enough to know better...but young enough to do it again....:2thumbs: ...(body permitting)...:opps::doorag:...71 in a month...:thumbup:

Could you guys please send some of that sheep fuel over to OZ.....:pray::pray::pray:

Fuel here at the moment in OZ is AU$1.69 a litre = US $6.39 a US Gallon...for premium.......

Hi guys.... This is on the front sidewall on the OM Kenda tyre on my 2017 F3s Daytona....Standard Rim:5.0 J ...
I'm thinking that means a Standard Rim with a "J" profile....5.0 inches wide...

AH....It looks like the retaining bolts have been mixed up with the engine oil filter....the engine filter bolts are longer than the bolts on the transmission filter....looks like one of the bolts on...

Hi Marty...welcome to the mad world of Spyder riders...might try... http://www.ozspyderryders.com .. they are your local forum in South OZ...

"The Spider will not move as there is only a scraping sound as the clutch tries to engage."
--------------------------------------------------------------------------------------------
This...

Go to..... www.spyderryders.net.au ......click on "Main"......in the drop down menu..... click on "Tips and Tricks"....scroll down until you find...."Dreading replacing a tail light globe.....Good...

This guy has a wheel chair rack fitted to a RT.....
https://youtu.be/rfwS-gGautk

Hi Pete,
I just read through your disassembly/assembly procedure...
I'm not sure with the F3...but on all the earlier models...(RT...ST...RS) you need to disconnect the bottom shock bolt to allow...

This is Echo, a 25kg Boarder Collie..she loves comming with me on the Spyder .. she wears a webbing harnes attached to the carrier to keep her safe .. she can lie down or sit as in the photo ........

This is my 2014 STS ..... the 2013 ST will look the same with the air flow panels fitted....


http://i1297.photobucket.com/albums/ag34/charcol541/DSC_0007_zpsqii3cxdq.jpg

HI, Asdgirl.....I fitted Custom Dynamics Ezy Risers to a 2013 ST....as the 2013 RS/RSS have the simmilar style handle bars these should fit...they can be rotated back to bring the hand grips up to...

Here is some more info on it........... http://www.bugwing.com/

Hope the link works...........

This is how I lowered the height of the brake pedal on my 08 GS...
Requires cutting off the original pedal and replacing it with a piece of 40mm +40mm +3mm angel ... drilling 2+6mm holes into the...

Waiting.... :popcorn:.....waiting....:popcorn::popcorn:.....waiting.....:popcorn::popcorn::popcorn:..... buggar!!!! .... out of POPCORN !!!...........:shocked:


Come on guys......lets in on the...

These bar risers (pictured) are in the horizontal position ... they can be rotated to a more vertical position which will in turn will adjust the reach.... hope this helps....

Ride Safe....Col

http://www.spyderlovers.com/forums/showthread.php?65381-Fitting-Custom-Dynamics-quot-Ezy-Risers-quot-to-a-2013-ST

I fitted these to a friends STL and he was happy with result....
There is no...