I cut the zip ties then didn't run the wires back.just a couple tie wraps to the frame for the wires.now pull the pins and remove the skid plate whenever you want.
Type: Posts; User: michaelfrmtx
I cut the zip ties then didn't run the wires back.just a couple tie wraps to the frame for the wires.now pull the pins and remove the skid plate whenever you want.
I'm not the best painter, specially with spray cans.i had a tiny run on the trunk piece.so far its holding up.if it flakes or peels,i'll just shoot them again
never seen an engine blow up from changing the oil too soon.j/s
haven't messed with the rims yet.powder coating would be the best way but a bit labor intensive.took off the rally belly pan to see the bottom better and chase a tiny oil drip.damn wiring is ty...
Changed my panels to black and painted the silver pieces black.these things are so much fun to ride.
order parts online.i use can am parts house.discounted some and fast service.
its odd the latest recall is for the retainers.the main reason there gonna be outta place is if the nut cracks.odd,and the dealer conroe Texas is borderline sucky too.
word to the wise.if you run your Ryker with the rear wheel off the ground,it will throw a VSS fault.resets,but I'm not used to this electronic stuff I'm old.
the delivery they have to pay.considering mine had a couple problems, the setup charge is just more profit but yes I paid it.
looked underneath again and all over the engine.no sign of any leaks.the oil hasn't been changed yet.and drain washers are cheap.why chance annealing one and have it split.but that's just me.
no its factory.1000 milesish.worries me some.and not low on oil.
I ran my 2020 Ryker Rally up on the ramps the other day.just looking at the exhaust and stuff.drop of oil on the drain plug.my wife's 2003 mustang had that.they forgot the pan gasket.anybody else...
deep in the edge of Texas,groves.
my main question is why the semi synthetic and not full synthetic oil.ive run it in every Toyota I've had for 20+ years.the Rotax engines are super reliable.just a question no need for debate.
I wonder if there's a can am tech on here.i have a couple questions.i also noticed the little square channel .
ha ha noticed the same thing on my 2020 rally today.damn bolt was barely tight.straightened the bars and tightened the bolt, thread locker too.if it loosens again I'll take it back to the dealer
and yes I shoulda took it back to the dealer.but there 100 miles away and it was an easy fix.only 350 miles on it too.my rzr steering wheel was crooked to when I bought it.poor assembly on that one.
along this same lines, if it seems your bars aren't perfectly straight going down the road, there not.backed mine up today and the bars were about 15 degrees or so to the left when it was going...
yea the thing is a little twitchy,im thinking 90ish gonna be about it.did finish my 250 miles.im hoping I'll get some time to make some real miles.
if its the same size as stock the computer doesn't know any different.its round and black like he said.those are odd sizes though.and mine has a ton of weight on the left front.makes me think the...
groves,texas
hell I looked thru my owners manual and didn't see anything listed.i did find the videos of the 900 on a dyno and I do think it was about 7750 where it leveled off.hopefully I'll get a day off to...
nowadays it seems most salesman at bike shops don't even ride.probably car guys just moveing around.it is rare to find a bike person that's knowledgable on anything.
What’s everyone seeing as far as maximum safe rpm.i can’t really find much.does the ecm
pull back power at a certain point?I'm still breaking mine in, but just curious as to the engine.my 900 rzr...
I got quoted 10,962 OTD in Texas.6.25% tax, various fee's.there outlandish assembly fee I think it was.they knocked 500 off to start.ended up with a Rally.they knocked 600 off it.total OTD was...
180423anybody found a discount outlet for the seat mount and seat.i'm gonna pick up a 2020 900 hopefully Wednesday.just trying to save a few bucks