Search:

PM sent.

They are on EBAY all the time!

I have the tall wide f4 on my 2012 rts. It is high quality with no distortion. I am 5'6" and the reason I bought the large F4 was to reduce the buffeting and wind hitting my wife. This windscreen...

Have 7K on mine and removes most of the "hand buzz" . I still get a slight, instantaneous buzz at 7K RPM, but it is just for as micro second!

I have had mine on my 2012 RT for 4800 miles and love it! Takes the "buzz" out of the handlebars at 5 to 6K RPM. Besides the upgraded sway bar this is one of the best mods I invested in.

Received mine in San Antonio, TX

I learned a long time ago with several of my Harley's to slide a plastic newspaper sleeve over the handgrips covering the switches while washing the bike. I still do this on the Spider out of habit. ...

I just paid $36.47 for the quick oil change kit part# 219800255. This includes the new longer transmission cover & o-ring (but not the longer transmission filter).

if this dealer wants $200 I go...

I installed the JM floorboards on my 2012 RT-S 10days ago! Let me say these are high quality, easy to install, and offer considerable room to move your legs. The one feature I was impressed with is...

Thanks guys, went back and watched all the videos again and now have it figured out. Ready to take the "1st plunge" so to speak!

Thanks again for the quick replies that may have saved me from...

I am in the process of installing my Utopia backrest. I have read all the posts giving hints, my question is this: What did people use to cut thru the plastic seat pan so the bottom T-Bar can be slid...

Had to replace the rear turn signal bulb on my 2012RT-S. The OEM part# is: Philips 12496. The odd thing about this bulb is that the mounting prongs are not at 12 and 6 o'clock but instead are at 12...

Now that's what I call a "WOW"

Thanks for the part #.

I also use 87 octane without any engine or performance issues. MPG made no difference between any of the octane gas, so why not save the money and go with what works!

I just installed the tensioned on my 2012 RT and did not have to cut the belt guard at all. Have driven it 400 miles since install and the tensioned does not touch the belt guard even with two people...

Total time was about 3 hours which included "yanking" the plastic off & back on. Was 95 here yesterday, so it took several "brewski's" and two fans. Just make sure you cut more wrap than you think...

I just did this yesterday on my 2012 RT. For the left side you definitely will need an extra set of hands, approximately 16-18ft of water soaked wrap (keep a squirt bottle nearby), I used three 2 to...

Thanks John, I need some of these!

I use a large pair of channel lock pliers (Home Depot) with a rag in the jaws to protect the shocks. Extremely easy with the bike up or down.

Yup, it is from the crate! I watched the the assembly tech assemble mine for 3 hrs and it is from the crate.

On the left side I mounted a analog clock, on the right side I installed the Whistler Cruisemaster Radar Detecter. I drilled a 5/16" hole in the center of the BRP button on the top of the...

I call my RT "SQONK" because all the good names are taken, i.e' Chewbaca, Yoda, etc.

One thing I learned washing Harleys and tons of other bikes with handlebar switches is: to cover the handlebar switches with either newspaper delivery sleeves, grocery bags or small garbage bags...