Search:

Option 2 works. I have lost the only key to my f3. The locksmith made a key to the lock and I turned off DESS .

Does anyone know how much torque to tighten the front brake caliper?

Hello!
Can someone tell me how hard to tighten the front wheel ball joints?
Can't find it on the forum
My bike is a ryker 600

I use repsol moto sintetico 4t 10w40

This is a car sensor. Just replace it if you have no warranty.

Unfortunately, they only have US shipping. On my suzuki m109r, I had to replace the clutch for 20k miles. So I thought it was time to order the Spyder as well. It is cold here in winter and it is...

Hello everyone!
Reading the forum, I saw reports from people that their spyder drove 100,000 miles. I would like to know how long the clutch lasts? I have a 2015 f3-s sm6 and have 50,000 km...

This is how I measured the front caliper
192756



Look for the part number on the caliper.
Or take it off, unscrew the piston and measure it

Find out from him what is the number of the repair kit for the front caliper. Brembo p4 32mm...

All f3 and rt are equipped with a brembo p4 32mm caliper. All of these motorcycles have the same caliper, pads and oil seals.
Thank me if this is helpful to you.

APRILIA Tuono V4R - APRC ABS...

My f3 is out of warranty for a long time but the caliper was removed for the first time. I found no more defects. Pistons in excellent condition

Today I disassembled the caliper. I think I found the cause of the jam. Brembo clearly has quality control problems...
One of the seals was clearly damaged when the piston was installed.

192730...

Need a front caliper repair kit for my f3. I can't find anything similar, although this caliper has been fitted on many motorcycles. Need help!

Where can I find a repair kit for brembo front calipers?

How should I properly adjust oem fox front shocks on my spyder F3-S 2015? I weigh 75 kilograms and sometimes a passenger 50.

How to properly adjust the front oem fox shocks? I weigh 75 kilograms and sometimes a passenger 50.

You can clean the radiators without removing them. Just blow them out with a compressor

Hello everyone! I recently changed my GS 2008 to f3 s 2015. The manual says that the engine oil should be 5w40. I have always filled in motul 5w40. Can I replace it with 10w40?

Only 998

I want to share information.
Maybe someone will come in handy.
It is not necessary to buy an original air filter for GS and similar models. The screenshot shows a list of cars from which the...

In your case, it is better to use stainless steel. Aluminum oxidizes rapidly in air. After polishing, it will quickly become cloudy

The leading edge is slightly curved
Sheet thickness is approximately 2 millimeters. Aluminum is a soft metal and will deform on impact but will not break like plastic.

The leading edge is slightly curved

I also plan to replace the protection under the radiators with aluminum

Everything is very simple. Cut to fit the original plastic protection. Cut from aluminum sheet. 15 minutes and you're done!
184789