Google conductive gloves and grab some popcorn
Type: Posts; User: Rotaxer
Google conductive gloves and grab some popcorn
It's just a brake part don't worry about it!!!! :roflblack: I would take a picture of it and send it to them and tell them a copy is on its way to your lawyer too, maybe they will respond...
Thanks Jim, I had a chance to check it out tonight and the jumper was there in the right sockets. The spades were a little black so I cleaned them up and will give it a try. I don't know why it...
I had my cluster replaced a while ago and now my Digital Temp gauge is replaced with what looks like a Air Suspension Digital gauge randomly. I do not have the auto air suspension. Is there a way...
I got the Prosport Voltage and love it, want to get the Digital clock next.
I rigged up a momentary switch to my Gorilla "Tilt Circuit" and mounted it under my left floorboard. I made it so the floorboard will deflect slightly to activate the switch, so when someone steps...
Too bad they did get it open to expose your truck monkey!!! Rat bassturds!!!!!
Maybe you need to rev to 8-9,000 a few times to see what the Rotax is capable of, then 5 k will sound good to you. The rotax likes to rev, I very rarely rev to 9 k, usually if accelerating...
Simple nose piece with snorkels for cooling the rad. A quick swap kit for the longer trips. No more roasted nuts maybe! :2thumbs:
Bought it online so not as easy to take back. In all fairness the system was very easy to install in the helmets. They do have FM Radio and the unit easily attaches and detaches from helmet mount...
I was looking into getting Senas before a big ride with a bunch of friends, they were already using older G4 and the newer G9 so I went that way too. I absolutely hate the G9 Power set I got and...
What year and model Spyder? 2010 RTs had a problem with faulty sending units. Probably nothing serious.
This is not normal, I have a slight vibration at that speed/RPM but is certainly bearable. Here is a procedure that will get you close and the tool needed. If after that you still have a bit then...
...........................................................................................................................................................................................................
If this is the way you are going to proceed, after changing filters and sending unit, check oil pressure with a manual gauge to see what you have cold to hot. Also remember that if the oil light...
Must be some copyright infringements there! Looks like my Silver Bullet RT
Yep! Heard most of them! "How do you like it", is my favorite.
Thanks I just spit coffee all over my monitor!!! That sounds like something BRP would do.
"Bombardier mounted the front disc brakes on the chassis of the vehicle instead of on the wheel hubs."
Just like their quads.
Yes I did that at the border crossing going into Montana two weeks ago riding with a bunch of 2 wheeled bikes. A young punk border guard walks up to us and says to me "That ain't a real bike" I...
Just top the tank up before you get home and the nice cool gas will bring it down to a better temp. and leave it in an open and as cool as possible location (seat up helps) until Spyder temp comes...
Mine acted the same way as many others have done. Have a 2010 and unplugged the analog Fuel gauge (which also disables analog Temp gauge) and yes digital gauges do appear and are very accurate. From...
In the automotive world it was illegal to weld front end and brake parts. Something about taking the temper out of the steel which could create a sheer point.
I could live with a 6 cylinder.
What year Spyder do you have? Looks different than mine. I am definitely thinking this maybe the way to go as I am sometime a very aggressive rider and don't need plastic determining my destiny....
Had this happen to me on my trip and by pushing down on it while playing with the key and electric release it finally opened. I also had trouble closing it one time and had me puzzled and what it...
DON'T forget to plug the holes under seat before removing hardware! Or hardware could fall into the BRP blackhole. :yikes:
Have 7 bars of gas left, just forgot to zero last fill.
Well the analog gauge acted up twice on the trip and I got a picture this time. Best thing about it is I was going right past the dealer when it screwed up so they saw it and ordered a new cluster....
That my friend was Lolo Pass in Idaho...from Montana to Washington, I am still smiling!
70818