Search:

Type: Posts; User: Eviltwin

Page 1 of 7 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    30
    Views
    5,255

    Rubber and the stainless carriage bolts came from...

    Rubber and the stainless carriage bolts came from Amazon. Aluminum diamondplate came from a local sheet metal shop, but could have been bought at Amazon I suppose. Carriage bolts were 1/2 in.-13 X...
  2. Replies
    3
    Views
    623

    FS: Still have it? I'm about 3 hours north in VA. ...

    Still have it? I'm about 3 hours north in VA. PM me if you do. Thanks.
  3. Replies
    54
    Views
    852

    That is an excellent diagram. Hope the OP...

    That is an excellent diagram. Hope the OP understands how it works. I'm not sure how much more layman I could make the explanation.
  4. Replies
    54
    Views
    852

    Engine is ground. Connect the battery back in...

    Engine is ground. Connect the battery back in the circuit. Dont connect the big wire to the solenoid. Check for 12v on the signal wire to the solenoid. Should be 0 volts give or take. If it's...
  5. Replies
    54
    Views
    852

    Could be the solenoid is stuck. Would be much...

    Could be the solenoid is stuck. Would be much more definitive if you could check for voltages.
  6. Replies
    54
    Views
    852

    Sounds logical. Wilpir, do you have a meter...

    Sounds logical.

    Wilpir, do you have a meter or test light to verify voltages on these wires? I wouldnt think a solenoid would stick, but who knows what happened when you were disconnecting the...
  7. Replies
    54
    Views
    852

    Maybe. Solenoid was closed, thats why the...

    Maybe. Solenoid was closed, thats why the starter motor was running. He disconnected both wires and then reattached both. I would have left the heavy wire that went to the motor disconnected and...
  8. Replies
    54
    Views
    852

    Yes, if you remove the heavy red cable, there is...

    Yes, if you remove the heavy red cable, there is no power to go to the starter. Then if the battery is back in the circuit, you can see what powers up. You can also test for 12v to the solenoid...
  9. Replies
    54
    Views
    852

    What emergency kill switch? The one on the...

    What emergency kill switch? The one on the handlebar? If the solenoid is stuck, that switch is out of the equation.

    Problem with this idea is that if indeed the bike started which is doubtful due...
  10. Replies
    54
    Views
    852

    Starter motor is on the front of the engine, not...

    Starter motor is on the front of the engine, not sure if the starter solenoid is there also. At this stage, probably the best bet is to remove the side panels and start looking around. You can...
  11. Replies
    54
    Views
    852

    Sounds like the starter solenoid is stuck closed....

    Sounds like the starter solenoid is stuck closed. Not quite sure how that can happen, but I dont have another way to explain why it tries to crank as soon as the battery is reconnected.
  12. Replies
    30
    Views
    5,255

    If you are handy, you can make your own. I...

    If you are handy, you can make your own. I modeled mine off the seal boards though I used aluminum diamondplate and stainless carriage bolts along with some hard black rubber to help cushion...
  13. Quite a bit of difference really. Riding the...

    Quite a bit of difference really. Riding the Spyder, you may feel a bit like you are riding a bike, open air, handlebar, but that is where it ends. It's much more like a car than a bike. On the...
  14. Replies
    11
    Views
    469

    I have a Honda Silverwing 600. It's a great...

    I have a Honda Silverwing 600. It's a great bike, easy to ride, easy to park and tons of storage. Linked brakes, no shifting. Reliable as only Honda's are. Not made anymore, but that is not a...
  15. I've heard similar things about the wait for...

    I've heard similar things about the wait for service there. Some friends brought them their 2013 there and it was over a month before they got it back and it was stored outside without a cover as...
  16. Having owned one now going on almost 2 years,...

    Having owned one now going on almost 2 years, I've put about 4-5K miles on it. I bought it because I was still new to riding and a bit nervous after being off a bike for 30+ years. I tell everyone...
  17. Replies
    41
    Views
    6,114

    Here is my version of home made. Rear mounts on...

    Here is my version of home made. Rear mounts on a stainless carriage bolt that has about a 1" square hard rubber sheath. Stainless bolts throughout.

    https://i.imgur.com/kcuMV8Q.jpg
    ...
  18. Replies
    48
    Views
    2,067

    I own a Silverwing and at 60 its turning around...

    I own a Silverwing and at 60 its turning around 5K rpm. That is with stock pulley setup. My guess with the Ryker is that you are pushing a third wheel with a disc that creates drag. You also have...
  19. Replies
    5
    Views
    459

    [SOLD] Here is an alternative, I've been using it for...

    Here is an alternative, I've been using it for about 15 months:

    https://www.amazon.com/gp/product/B075848KTW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

    Current price is about 55 bucks, for...
  20. Replies
    13
    Views
    799

    Here ya go. Bought off Amazon, think about 6 or...

    Here ya go. Bought off Amazon, think about 6 or 7 each. Perfectly visible during the day, dont mess with the cluster, just wire into the wiring that goes to the mirrors.
    ...
  21. Replies
    24
    Views
    593

    I had my Right shoulder joint replaced beginning...

    I had my Right shoulder joint replaced beginning of Dec 2018. I think I was officially down for about 10 weeks though I did cheat a bit and rode just around the neighborhood around week 6 or 7. ...
  22. Replies
    41
    Views
    5,939

    I did these on an RT last year. About 6 bucks...

    I did these on an RT last year. About 6 bucks each, metal bezel, daylight bright.

    171986171987
  23. Have/had. Whatever. Someone tries to give you...

    Have/had. Whatever. Someone tries to give you some good advice and that is how you respond.
  24. 156 is quite high. Since you have afib it may be...

    156 is quite high. Since you have afib it may be related to the sensor picking up the extra beats, but I would not be nonchalant about it. It's also possible that something in the bike is causing...
  25. Replies
    12
    Views
    635

    Trailer weighs about 6-700 lbs. Bike weighs...

    Trailer weighs about 6-700 lbs. Bike weighs around 900. Also has the cargo box mounted in the front that has maybe 20-30 lbs of "stuff" including tiedowns and the box itself. So figure around...
  26. Replies
    15
    Views
    1,208

    HowTo: I have/had a problem with the ramp on my alumina...

    I have/had a problem with the ramp on my alumina trailer being a bit short which can cause the nose of the bike to scrape a bit getting on the ramp and grind the underside going over the middle with...
  27. Replies
    12
    Views
    635

    I don't know if this will help, but this is how I...

    I don't know if this will help, but this is how I have my trailer set up with the RT. I had heard the balance point was where the front peg was. For this setup, I moved the bike back and forth a...
  28. It was posted on the Daytona beach CL, so I'm...

    It was posted on the Daytona beach CL, so I'm guessing in or near Daytona FL? Really though, no location and no price? Gotta wonder.
  29. Replies
    21
    Views
    488

    From one RN named Bob to another, I hope all goes...

    From one RN named Bob to another, I hope all goes well. I've never had any cardiac surgery, though I've had my share of joint replacements.

    I wasn't familiar with what the TAVR procedure was, so...
  30. Replies
    8
    Views
    1,033

    There's this: ...

    There's this:

    https://www.lifts-and-stands.com/wp-content/uploads/2016/05/BBL-Big-Blue-5.jpg


    but I use something like this:
    ...
Results 1 to 30 of 186
Page 1 of 7 1 2 3 4