Well my hitch came in today but the search continues for the Isolator that is compatible with the Limited. Any help would be appreciated!
Printable View
Well my hitch came in today but the search continues for the Isolator that is compatible with the Limited. Any help would be appreciated!
Bump
Contact Lewis @ Electrical Connection, he used my F3T for the prototype.
Did you purchase a 3rd party trailer hitch or the BRP hitch?
There's a plug n play harness on E-Bay a Canadian company who also sells hitch.
The F3T or F3T Limited trailer kit wire module is different from a F3 aftermarket hitch and wiring.
http://www.ebay.com/itm/Can-Am-Spyde...lXmPsh&vxp=mtr
Says it will fit a F3-T 2016. They also have a listing for a F3. I guess they are wrong??
It's at least worth a call.
I bought a hitch from them for my 2015 F3 nice product.
The hitch I purchased was a Show Chrome. I had inquired on here whether anyone thought it would fit the F3 Limited and I was told by a member that it would. The answer to that question is yes and no. No, it will not go on like the directions state (BTW, it does state in the directions that it will not fit F-3 models). Yes, it can be made to work. It will have one less bolt than what it was designed to have but it could be drilled for the third bolt on the right side of the bike. I left it with just two bolts for now. I will be pulling a Tag-along so I don't think that it will be an issue. Feel free to comment as you will.
Thought you were looking for a wiring harnesses.
Could you explain in detail why you can't get all the bolts in the hitch or take some pictures of the problem. Since the swing arms are all the same across all models except F3. I don't understand why it won't fit on a F3 Limited.Quote:
Originally Posted by acpd22
I'm guessing as I'm going through the same process myself, but I suspect that it won't directly fit an F3 LTD because the radio/audio system already uses the required power connector under the pillion seat. I'm guessing that the power wiring needs to be spliced at this point to run the trailer.Quote:
Originally Posted by billybovine
Good luck.
That's why it's always best to buy a BRP hitch. No headaches.
I have a new 2018 F3 limited and I have called all dealers and can't find a trailer light harness I called BRP in Canada lol said to call the dealersQuote:
Originally Posted by acpd22
Don't know why you can't find one. It shows on the online catalog as available. That means it in stock. So just order it. Or are there details you are not telling us or I am missing something.Quote:
Originally Posted by raysproshop
https://www.brp.ca/on-road/shop/spyd...d-rt-2018.html
I just finished installing the BRP hitch from our 2014 RT onto my wife's 2018 F3L.
Here is a list of items needed for the wiring.
#710003903 Module
#710005823 Module harness
#710004851 Trailer harness
#207144060 M4 x 40 Screw
#250100143 M4 panel nut
#233261494 M6 flanged nut
#250000722 M6 x 20 screw
#518321570 Open clamp
The first three items are for the wiring from the bike to the trailer. The rest is to secure the wiring to the bike ( I did use cable ties that I have). The hardest part is running the trailer wire from under the seat to the bottom of the left saddlebag.
You can pull up the BRP instructions for Roadster Kit #219400852 Trailer Hitch F3T and Limited from BRP, or Lamonster Garage website (this is where I pulled it from)