What size socket is needed to remove oil filter lid on a 2020 Spyder RT Limited?
Printable View
What size socket is needed to remove oil filter lid on a 2020 Spyder RT Limited?
if they are the same as the older models it would be a 36MM. Since its the same engine.
Yes. 36mm, same for all 1330 engines.
Buy a good socket. It also fits the rear axle -- at 166'# you want a quality tool.
Or
Get this torque wrench extender. With my torque wrench it converter to 117#, you do not have to worry about the muffler being in the way.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
And I bought is for the other end.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
And this 3/8" drive for the oil filter.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Equally important, and possibly even more so, remember that the crankcase drain plug requires a T-45 Torx bit and the clutch cover, aka transmission, drain plug is 6mm Allen. Using the wrong tool on the crankcase plug can get you to s**t city.
KX5062,
Thanks
Snoking1127,
Thanks
Jaybros,
Thanks
Trikermutha,
Thanks