Originally Posted by
skeetshooter
I used 1 friend 1 quart dot 3-4.I sucked the old fluid out with a turkey baster then filled it up with new fluid.We started on left front stuck a piece of clear tubing over bleeder valve my friend worked the bleeder while i worked the brake peddle.We pump until we got clear fluid.We then did the right front then the back all the same way.Just be sure bleeder valve is closed before you let brake peddle up each time.The vcm is hard to get to, went in on left side pulled left panels off to get to it.The bleeder valve is on top it is hell to get clear tubing over bleeder valve.It would have been alot easier to take the trunk off but it can be done without it.Be sure to keep fluid near full when doing it you don't want to get air in system.I
used just about the whole quart,took about 1 hour 1 1/2 we had to stop and drink a few shop supplies.Its easy to do just watch what your doing.:2thumbs: