Printable View
Hi Everyone
I am fishing for information, does anyone know who it is that
makes the ram ball type mount for the hand held CB radios
folks use on their Spyder's I have the SENA SR10 and cables for them
but not the mounting parts.
Let me know what you have for information
Thanks
Dave
http://www.providence-spyder-accessories.com
I got one and as soon as I get the Tri Axis handlebars on I'll add the RAM ball so I can use the CB when needed.
There is this one if the CB has screw holes on the back that will match.
https://www.rammount.com/part/RAM-111U
This one would probably work.
https://www.rammount.com/part/RAP-HOL-UN4-201U
Here's the holder only. Add a ball mount plate to it and a double socket arm and you've got what you need to attach it to a ball on the handlebar!
https://www.rammount.com/part/RAM-HOL-UN4U
Here is the one for talkies and such that have belt clips:
https://www.rammount.com/part/RAM-HOL-BC1
I "made" my adapter to work with what I had, there are pictures in my Mod section.
this is the one I use as my radio has the belt clip on it .It works really well on the handle bars Dave. I put a Ram ball on the bars and the medium length arm and then that ram mount for belt clips. Works great.
https://www.rammount.com/part/RAM-HOL-BC1
I thought for sure RAM made a specific cradle for that handheld CB since it's so popular.
I will have to go looking but I thought I saw one.
Bob
On the Ram unit that was posted for the talkies, I modified mine to hold both a CB talkie and my Yaesu FT-270 talkie. I had too also add an elastic strap for the Yaesu.