Anyone fitted an oil catch can? Help would be great....
wanted to ask those who have installed one, as i always was thinking that my front valve cover gasket is my problem but now starting to think that this oil is coming from an air box as i been to used bikes dealer saw one 2012 RS with 2500 km on it and 2013 RSS with 2900 km and they were leaking oil same spot as mine it runs down on the engine and in between cylinder and drips on the ground from the gear selector shaft.
So i've decided to install an oil catch can but cannot find any pics on the forum or google what type size of oil catch can to use and where is the best placement for it. if someones got some pics please share . thanks
Crank Case Breather Bypass Filter
This one works very well for me and those who have tried it. It is not a Catch Can as they accumulate the captured oil and you have to drain them from time to time. I like this method because first, it works. 2nd, there is virtually zero maintenance and 3rd, it returns the oil to where it belongs, the crank case.
It's also very cheap to do with readily available parts and it is pretty easy to do as well.
Plus, with a real catch can, you continue to lose oil until the oil level gets down to where you stop losing oil through the crank case vent. With this little invention, you can run your oil level where it is supposed to be, full! You may burn some, but that's going to happen with the 998 V-Twin motor no matter what you do. And if your motor is burning oil, don't you want to start at the full mark instead of low on the dip stick?
http://www.spyderlovers.com/forums/s...ighlight=catch
Oh, and that's BAJARON by the way. A lot of people have trouble with the name... :rolleyes: