Printable View
After installing the tric-LED rear and side marker LED lights I ran into a bit of an issue - the 4 plastic push pins had to be drilled out. They simply would not come out. I don't want to go down this road again, so what have some you tried instead of the push pins? .... Thanks.
Search. Many threads here regarding this issue.
Yes, here’s one that comes up in a search for “ push pins”, Mosess. You’ll be kicking yourself you didn’t find this before drilling them out ;) …… and there’s a thread just below your post that also tells how to remove and replace them.Quote:
Originally Posted by FrogmanDave
https://www.spyderlovers.com/forums/...ew-body-styles
Pete
I started kicking myself the moment i realized i had no options, i drilled them out and i may have found a solution, i happen to have 6mm threaded nut serts . I installed tem on one side just need to get 6mm allen bolts in stainless steel. If if it works ill send you the info. I have never been able to post pics on ths site so if you like ill send it to you.....
I didnt put mine back in when I did my lights. No issues. The screws hold everything just fine.
I kept experimenting with different types of nutserts and finally went back to the crappy push pins...