Printable View
I have a 2015 RTSE6 .
I'm looking for the part numbers for speedbleeers for the front and rear. I called the company and was told they don't have a specific part for the Spyder. That I needed to remove and measure the original bleed screws on my bike and they could match them. Bike is still in winter storage.
Thank you in advance.
Try this thread for some answers https://www.spyderlovers.com/forums/...speed+bleeders
I just ordered them for my :spyder2:. They sent the wrong size [ SD8125L ] and are now in the process of sending me the 6mm size. The gal there was flummoxed about this, but was happy to fix it right away.
Mine are in the mail as we speak......hope their the right ones.....:popcorn:
My bike took SB6 125.
OK. Just got off the phone with SpeedBleeders.
They are exchanging my order of SB8 125L for SB6 125L.
I hope the clutch bleeder is the same as the brake cylinder bleeders.:pray:
Great customer service.
So........what's the correct size for the ABS system on the GS and ST ?
I'm guessing it's 10 mm, cuz that's what SB sent to me.
This company is fantastic. I too got the wrong size (M8) back in December. Went to install them today and realized they wouldn't fit.Quote:
Originally Posted by Lew L
One phone call and the correct size (M6) are on the way. They are even including return postage for the wrong ones.
Apparently BRP changed the bleeder size from 8mm to 6mm in 2013 and Speed Bleeder was not aware of it.
They even went so far as to order a stock BRP bleeder screw and measure it to verify the correct size.
The speed bleeder folks are awesome
I ordered from Speed Bleeder by phone months ago and the same thing happened. They sent a set of 6 mm right away at no charge. I told them to take note that the 8 mm ones are too large. They said they would. I guess the left hand doesn't know what the right hand is doing at SB.
Spyders 2008 - 2012 are SB8125L-M8- 1.25 - 32.54 and 2013 to 2019 are SB6100-M6- 1.0 - 28.80. According to the chart.
You're gona love the speed bleeders. They make a somewhat easy job a brainless event.
I change my brake fluid every spring and it just takes minutes now to do it. It's effortless.
Tim
And you don't have to yell...Honey come here and press the brake pedal for me, but only when I tell you.
Just ordered a set. Their applications chart has the right numbers on it now, SB6100 for the calipers and SB1010 for the ABS.
It sure took them a while to get it right.Quote:
Originally Posted by IdahoMtnSpyder
I should have said for 2013 on, except Ryker. They show SB8125 for Ryker and up to 2012.
I ordered a set, but if I can find them I'll check which size I got. It was probably a year ago. I was going to replace the brake fluid soon during this lockdown.