Tow Dolly. Okay to use with Spyders?

Just wondering if anyone knew if using a dolly would be okay and letting the rear wheel drag and keeping it in neutral. I already have a flatbed trailer but was thinking this would be a cheaper alternative but not sure if it will mess up the rear end.

Found this company in CO that makes dollys.

http://americancardolly.com/

Not sure but I'm sure you will learn a bunch from the members on this forum. I took a look at the dolly and it does look good --- possible depending on the info you recieve on this threat I may have one soon. Maybe they can build a dolly that has ONE rear tire on the back so that the dolly will look like the wheels of a spyder so we don't have to worry about draging the rear tire.. What you think??
Joe

If I recall, someone here tried to fit a Spyder on a dolly, but had loading, clearance, and width issues. Not a viable alternative, IMO.

Quote:

---

Originally Posted by MetroAsian

Just wondering if anyone knew if using a dolly would be okay and letting the rear wheel drag and keeping it in neutral. I already have a flatbed trailer but was thinking this would be a cheaper alternative but not sure if it will mess up the rear end.

Found this company in CO that makes dollys.

http://americancardolly.com/

---

Absolutely not a good idea. :lecturef_smilie: It will certainly play havoc with your wheel bearings and final drive, even if the Spyder is in neutral.

Bruce

Quote:

---

Originally Posted by Director

Absolutely not a good idea. :lecturef_smilie: It will certainly play havoc with your wheel bearings and final drive, even if the Spyder is in neutral.

Bruce

---

I too would be apprehensive about doing this for anything more than just a few miles, in a pinch.

Quote:

---

Originally Posted by HDXBONES

The transmission is lubricated with engine oil when the engine is running......Wonder how much lubrication would be happening if the engine isn't running, and the output end of the tranny is spinning away.....:dontknow:

---

I don't think the results would be pretty....:(

Quote:

---

Originally Posted by MetroAsian

Just wondering if anyone knew if using a dolly would be okay and letting the rear wheel drag and keeping it in neutral. I already have a flatbed trailer but was thinking this would be a cheaper alternative but not sure if it will mess up the rear end.

Found this company in CO that makes dollys.

http://americancardolly.com/

---

The closest thing I can find is the stinger trailer. It folds and stores upright.

You saw the date on that post correct ?

Quote:

---

Originally Posted by LadyDi'sSpyder

The closest thing I can find is the stinger trailer. It folds and stores upright.

---

If you go with the dolly you may end up being sorry. Go with the trailer, less chance of damaging your spyder.

See post #3 from Nancys Toy.

Scotty is considered a guru of Spyders.

If he suggests no, that is good enough for me. :yes:

Quote:

---

Originally Posted by LadyDi'sSpyder

The closest thing I can find is the stinger trailer. It folds and stores upright.

---

Hello LadyDi, Ten year old post, but we do have a Trailer area on the forum that has many threads about different trailers here is a link to one thread for the Stinger Trailer https://www.spyderlovers.com/forums/...tinger-trailer good luck in your search. DO NOT USE a tow dolly. The only way to use a tow dolly and be sure and not damage your Spyder is to remove the drive belt, way to much work and even then its hard to load.

Check out my thread called "My spyder transport system" Just may get some ideas.

I wouldn't do it.

Old thread, but, anyone considering towing needs to read the operator's manual under the section for "transporting". Simply put, it says don't do it.