Oil change specification from owner manual

I just ordered my shop manual, a day late of course, but in the meantime I wanted to see if anyone could help me with a couple of specifications.
I have found conflicting online information. The Torx sizes for the engine drain is a T45. Is the transmission housing is a T40 or a 6MM?
Second question is the torque settings, I found the torque setting for the 2 drain plugs in the manual so I am all set there, but the oil filter is not listed. Does anyone happen to have that handy?

Thank you in advance

The oil filter is 25 +/- 3 N.m or 18 +/- 2 lbf.ft

Quote:

---

Originally Posted by SpyderAnn01

The oil filter is 25 +/- 3 N.m or 18 +/- 2 lbf.ft

---

Thank you Ann. I'm just buttoning up so perfect timing. However, I just discovered that the crush washer for the oil,drain plug was not in the kit........:gaah::gaah:

Quote:

---

Originally Posted by Brentc

Thank you Ann. I'm just buttoning up so perfect timing. However, I just discovered that the crush washer for the oil,drain plug was not in the kit........:gaah::gaah:

---

You can safely reuse your crush washer unless its really deeply scored.

I also just found out that Home Depot carries them. Cool thing was within minutes of me asking about the washer, I had one mailed to me from a fellow spyder Ryder in Tennessee.

:thumbup: